  Virtual DSP Sound Drivers for Sensation! (250-1650)

These are updated sound drivers to make the Sensation! more
SoundBlaster compatible. Consequently, more software packages which
utilize the audio can be run on the Sensation!

This disk contains the following files--

   TANDYSND.DRV
   TANDYMMA.DRV
   VDSPD.DRV
   VDSPD.386
   VISBIOS.COM
   README.TXT


In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure the printer is switched on, is on line,
and at the C:\> prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.


INSTALLATION

   1.  Turn on your Computer. At the C:\> prompt, type--

       CD\WINDOWS\SYSTEM

       and press <ENTER>

   2.  Insert this drivers disk in Drive A.

   3.  At the C:\WINDOWS\SYSTEM> prompt, type--

          COPY A:*.DRV

       and press <ENTER>. This will copy the TANDYMMA.DRV, VDSPD.DRV,
       and TANDYSND.DRV files to the WINDOWS\SYSTEM directory.

   4.  At the C:\WINDOWS\SYSTEM> prompt, type--

          COPY A:VDSPD.386

       and press <ENTER>. This will copy the VDSPD.386 file to the 
       WINDOWS\SYSTEM directory.

   5.  At the C:\WINDOWS\SYSTEM> prompt, type--

          CD \BIN

       and press <ENTER>

   6.  At the C:\BIN> prompt, type--

          COPY A:VISBIOS.COM

       and press <ENTER>. This copies the VISBIOS.COM file to the
       BIN directory.

   7.  At the C:\BIN> prompt, type--

          CD \

       and press <ENTER>

   8.  Restart your computer for the updated drivers to take effect.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."
