                                                                 October 1995
                        IN-220P Series Ethernet Card
                       Windows 95 Driver Installation
                       ==============================

Copyright (c) 1995 by Infotel Corporation. All rights reserved.

The IN-220P Series Windows 95 driver are used for IN-220P series adapter.

Windows 95 driver for IN-220P Plug-and-Play card.
=================================================

 IN-220P drivers have already been included in Windows 95 release version.
 If you want to use the newer driver included in this diskette, do as follows.

 NOTE : When installing network card driver, Win95 CD-ROM or floppies should
         be on hand.

  1. Copy NETIN22P.INF from A:\WIN95 to C:\WINDOWS\INF if the Windows path is
     in C:\WINDOWS.

  2. Using text editor to modified file "C:\WINDOWS\INF\NETNOVEL.INF"
      ex:     c:\>edit \windows\inf\netnovel.inf

  3. Find the line "%V_DLink%=DLink" in netnovel.inf.
     Add one semicolon at the front of this line.

     ex:      [Manufacturer]
              %V_Novell%=Novell
              %V_ArtisofT%=Artisoft
              %V_NatSemi%=NatSemi
              %V_Zenith%=Zenith
              %V_Intel%=Intel
              %V_Linksys%=Linksys
              %V_Accton%=Accton
              %V_Realtek%=Realtek
              ;%V_DLink%=DLink

  4. Save the file and Quit the text editor

  5.  From the Control  Panel, select  the Network  icon.  The Network  windows
     should appear.

  6. From the Network window, Select "Infotel IN-220P ISA PnP LAN adapter"
     Click on <Remove> button, to remove the old driver.

  7. From the Network window, click on "Add". You will then be asked to select
     a component type, double click on  "Adapter".

  8. A list of network card Manufacturers and Network Adapters should now be
     shown.
     Select the "Infotel" on Manufacturers and "Infotel IN-220P Plug and Play
     Adapter" on Network Adapters window.
     Click the <OK> button.

  9. When all the setting are complete, click on "OK" on the properties page
     to return to the network window. If everything looks correct here, click
     the "OK" to close the network window.

 10. The setup will ask you to type the correct path of the new driver.
     Put the driver diskette in drive A: and type the full path of driver.

 11. While copying drivers, Win95 also needs Win95 CD-ROM to copy other files
     in  D:\win95 if your CD-ROM drive is D:. So you need to change the correct
     path.

 12. Select "Yes" to restart your computer.
