
 Instructions for using the Configuration Update Utility for 68XX, 65X6, or 65X8 : 

 I.  On your Master Machine that has the Manually Updated Configuration
     A.  Open a DOS full-screen session.
     B.  Change to the A: command prompt.
     C.  At the A:\> prompt, type
         1.  For 68XX:  SRCMOSN1 filename /C
             For 65X6:  SRCMOSLP filename /C
	  For 65X8:   SRCMOSLT filename /C
           
         2.  Note:  filename is the name of the file that the Configuration
             Information of your Master Machine will be stored in.

II.  On your subsequent machines which have not yet been updated
     A.  Open a DOS full-screen session.
     B.  Change to the A: command prompt.
     C.  At the A:\> prompt, type
         1.  For 68XX:  SRCMOSN1 filename /U
             For 65X6:  SRCMOSLP filename /U
	  For 65X8:   SRCMOSLT filename /U
           
         2.  Note:  filename is the same file from above that contains the
             Configuration Information of your Master Machine.
	 3.  Note:  The system will automatically reboot after CMOS has 
 	     been updated.
     D.  The Configuration of this machine has now been updated to match
         that of your Master Machine.
