whatsnew.txt for UniRefresh
***********************************************************

UniRefresh v1.42                            October 11 2000

* Added sizing/centering options.
* Frequency measurements are much more accurate in a 
  windows dos box.

***********************************************************

UniRefresh v1.41                              August 5 2000

* Fixed the wrong colors with 24bpp modes. (this was broken
  in version 1.4)
* Added a workaround in the setup program for alt-tab
  problems (windows really messes up the mode number).
  Except for 4bpp, alt-tab should always work now.
* Added a workaround in the TSR for alt-tab problems. This
  does not work for 4bpp modes and for modes with mode 
  numbers greater than 17fh.
* Changing the VBE (new vid card/flashed bios/new VBE TSR)
  no longer resets the monitor specifications.
* Fixed some minor visual problems in the menu when many 
  resolutions (17+) or many modes (100+) are supported.

***********************************************************

UniRefresh v1.4                                July 21 2000

* Fixed the sharing problem when using 2 dos boxes.
* Implemented a character routine in the setup program. The
  program no longer relies on the BIOS to draw characters.
* Added a message when calculating the 'Autoconfiguration'.
  (This is to avoid confusion with 3dfx cards, with their
  extremely slow BIOS routines) 
* Added some more items to 'View VBE information'.
* Rewritten much of the VESA stuff in the setup program to 
  make it smaller/faster/more compatible.
* Added some visual enhancements to the test screen.

***********************************************************

UniRefresh v1.32                           February 24 2000

* Fixed the divide by zero error when the VBE returned zero 
  as the MaxPixelClock. (this was a problem with some VBE
  TSRs)
* Fixed the crash when no video modes are available. (no
  one has ever complained about this, so it took a while to
  get noticed)

***********************************************************

UniRefresh v1.31                           December 16 1999

* Non-integer input is allowed.
* Added a workaround for some low res problems with the 
  3dfx Banshee and Voodoo3. (You need to enable this
  workaround in the "General options" menu.)

***********************************************************

UniRefresh v1.3                                 May 28 1999

* Added view/set refresh rates per resolution.
* Fixed the problems with the test screen on V3 and 
  Banshee.
* The TSR now uses the correct path to open the data file.
* Added test screen for 4bpp modes.
* Horizontal frequency is now also measured.

***********************************************************

UniRefresh v1.2                                  May 2 1999

* The measured refresh rate is shown on the test screen.
* The minimum available refresh rate is shown on the 
  "view/set refresh rates" menu item.
* Fixed the speed problems with Banshee and Voodoo3 when 
  calculating. 

***********************************************************

UniRefresh v1.12                              April 30 1999

* The correct pixel clock value is used now. This is the
  first serious bug I found in UniRefresh. Prior to this 
  fix, the pixel clock value slightly differed from the
  exact right value.

***********************************************************

UniRefresh v1.11                              April 24 1999

* Using the highest refresh rate the monitor can handle 
  should be really fixed now.
* Improved text output from the TSR.
* Moved the UniRefresh homepage from Angelfire to 
  http://home.student.utwente.nl/unirefresh.
  The site at Angelfire was often not accessible.
* Updated readme.txt

***********************************************************

UniRefresh v1.1                                April 2 1999

* Support for mode 6Ah added, 800x600x4bpp.
  This mode does not have a standard VESA mode number, but
  it is defined by VESA.
* Locked timings.dat when TSR is resident.
* No more "ErrorCalc" when configuring with the highest
  refresh rate the monitor can handle. (This happended for 
  example with 320x200 modes with Riva 128/TNT, when 
  maximum refresh rate of monitor is 120Hz)

***********************************************************

UniRefresh v1.0                               March 23 1999

  First non beta release
* maximum refresh rate is now configurable.
* refresh rates for individual video modes are configurable.
* "quit without saving?" added.
* some other minor changes.

***********************************************************

UniRefresh v0.8                            February 12 1999

  first publicly available version, beta release.

***********************************************************

UniRefresh alpha 1                            April 14 1998

  first alpha version, not publicly available
  .com program only, timings for 640*480 and 800*600 are
  hardcoded in the program.

***********************************************************
