                          Additional Information

                         Sound Galaxy (Clinton-16) 
                         Device Driver for WINOS/2


Installation Procedure
======================

The Sound Galaxy Win-OS/2 audio device driver installation is as follow.

1 -  Open Win-OS/2 session from the COMMAND PROMPTS folder in OS/2 System
     folder.

2 -  Open the CONTROL PANEL's DRIVERS program from the WIN-OS/2 main.

3 -  Select the "ADD" button to add a new driver.

4 -  Highlight the "Unlisted or Updated Driver" item and then select
     the "OK" button.

5 -  Enter the Drive and the path (i.e. A:\OS2_WIN.211) in the Install
     Driver Windows and then select "OK" button.

6 -  Highlight the "16-bit Audio Driver" in the list window and press
     ENTER to continue.

7 -  If you are prompted that the required mm16c.drv driver is already
     on the system, always choose to install a "NEW" driver.

8 -  Use the default setting in 16 Audio Board Setup windows.
     (DO NOT choose IRQ7)

9 -  Select Restart now to restart WIN-OS/2 session from the COMMAND 
     PROMPTS folder.


All installation instructions will be updated in SYSTEM.INI file under 
item Clinton series sound card and [mm16]. You can also change or 
create the new MIDI map using MIDI map icon in Control Panel.


Troubleshoot Tips
*****************

a) If you receive "16-bit Audio Driver Alert" and need to modify your 
   system.ini for "device=*vdmad" statement:

ANS: You can't run the WIN-OS/2 session from "DOS Windows" or "OS/2
Windows" session due to the limitation of the early versions OS/2 2.1. 
The current version OS/2 For Windows 2.11 doesn't have this problem. 
Please start WIN-OS/2 session from "Win-OS/2 Full Screen" in the Command
Prompts folder.
