mach32, 32OS2260.ZIP
*****************************

1.0	Introduction
2.0	Installation Notes
3.0	mach32 2.6 Fixed list

*****************************

1.0     Introduction

The mach32 device drivers supplied here are for OS/2 2.1X and OS/2 WARP 
3.0.

*****************************

2.0	Installation Notes

DO NOT TASK SWITCH WHILE RUNNING THE INSTALL PROGRAM.

1. Ensure that you have a copy LOADER.ZIP.  It is available on the ATI 
BBS, ftp site (ftp.atitech.ca), and on our CompuServe forum (GO 
ATITECH).

2. Ensure that you have a copy of PKUNZIP.EXE, v1.10 or later.  PKUNZIP 
is available on most BBS and information services, including the ATI 
BBS and CompuServe.

3. Open a full screen DOS session.

4. Unzip LOADER.ZIP and 32OS2260.ZIP into the same temporary directory 
on your hard disk, then run the LOADER.EXE utility.  For example:

MD \ATITEMP
PKUNZIP LOADER.ZIP \ATITEMP
PKUNZIP 32OS2260.ZIP \ATITEMP
CD \ATITEMP
LOADER.EXE

5. Follow the screen prompts for installing the OS/2 driver.  

6. Once the driver has been installed, you can delete the contents of 
the temporary directory (DEL \ATITEMP\*.*) and delete the directory 
itself (RD \ATITEMP).  

7. We recommend that you keep a copy of the ZIP files (32OS2260.ZIP and 
LOADER.ZIP), in case you need to install the driver again.      

8. Run DSPINSTL from within an OS/2 window.

9. When the Display Driver Install panel appears, select Primary 
Display and click OK to bring up a list of choices.  You should see an 
option for ATI mach32.

10. Select 'ATI mach32 (Enhanced 2.6)' from the list and click OK. If a 
error message pops-up, which says "The installed adapter does not 
support the selected display driver.  Do you wish to continue?" ignore 
it and click OK.

11. When the source directory panel appears, select 'Change' and enter:
C:\MACH_OS2 (if you don't use c: as you boot drive replace it with the 
appropriate drive letter) Click 'Set' and then 'Install'. After the 
files are copied, exit the OS/2 window or full screen session. Shut 
down and restart your system.

12. The PM driver will first come up in 640x480, 256 colors mode.  Use 
the following steps to change the screen resolutions or number of 
colors:

   a) Open 'OS/2 System' icon.
   b) Open 'System Setup' icon.
   c) Open 'System' icon.
   b) Select the 'Screen' tab.
   e) Select the desired resolution and number of colors from the list.
   f) Double click on the system menu icon or select close from the 
	system menu to close the window.
   g) Shut down and restart your system.


*****************************

3.0	mach32 2.6 Fixed list

Microsoft Excel
Screen corruption in font style window under PM Excel
Not all the column lines are displayed in PM Excel
Only the active cell appears when copying cells.

Lotus 123
Color changes in OS/2 desktop using 256 colours.

Media Player
The cursor turns black after playing an AVI with the Media Player

Microsoft Powerpoint
Incorrect colors in MS Powerpoint Quick Preview

Microsoft Paintbrush
Bitmap images loose all color in Paintbrush

Lotus Smart Center
Corrupted Icon using Lotus Smart Center
Seamless Smart Center will not run in highcolor

Ultimotion
Screen bleeds through WIN-OS/2 full screen using Ultimotion

Seamless WinOS/2
Seamless WinOS/2 sessions corrupt
DOS Window Corrupts when WINOS/2 Seamless Active
Mouse Cursor disappears after being re-defined
Unrecoverable application error in seamless windows
Corrupted fonts are generated when two seamless windows are opened
COLOUR WRONG Seamless WIN-OS/2 @ 16bpp 555/664/655
Large MENU bar in SEAMLESS WINDOWS session

Full Screen WinOS/2
Multiple color boxes in full screen windows when VGA is disabled
Blank screen exiting Win-OS/2 full screen
Blank screen is generated when WIN-OS/2 full screen restored
Corrupted fonts when swapping between Full screen windows and PM

Presentation Manager 
System locked when opening the additional OS/2 Programs folder
Multiple mouse cursor in 800x600x24bpp
Garbage characters in SlideShow for OS/2

DOS sessions
Full screen DOS applications disappear using 1024x768 65K colours


