Radius MultiView 24 Release 1.03
=================================
This diskette contains software application drivers and DOS utilities
for the Radius MultiView 24 interface listed below.  For additional 
information about each application or utility, see the README contained
in the specific directory.


File/Directory Name             Description
===================             ===========
README.COM                      Utility to view README.TXT.
README.TXT                      This file.
README.RAD                      Release notes copied with installation.
INSTALL.EXE                     Installs user selectable drivers and
				utilities when run under DOS, installs
				Microsoft Windows drivers when run under
				Windows.
!RAD0021.CFG                    EISA configuration file for the
				MultiView 24.
@8066.ADF                       Microchannel Adapter Description File.
AI           <DIR>              Contains the 8514/A Adapter Interface.
DIAG         <DIR>              Contains user diagnostics for the
				MultiView 24.
MV24         <DIR>              Contains system utilities.
WIN          <DIR>              Contains the Microsoft Windows 3.X 
				drivers.


DOS Driver and Utility Installation
===================================
To install any or all of the above drivers and/or utilities, except
the Microsoft Windows drivers, insert this disk (Utilities and Drivers)
into drive A, and type:

    A:
    CD \
    INSTALL

A series of menus and instructions will guide you through the 
installation process.

The file README.RAD, which contains release notes and installation tips,
will be copied to your hard disk, along with the README utility and any
other utilities you choose to install.  Once it is copied to your hard
disk, README.RAD is renamed to README.TXT, so you will be able to use the
README utility to read it.  To read this file after installation (assuming
you have installed into the C:\MV24 directory), type:

    C:
    CD \MV24
    README


Microsoft Windows Driver Installation
=====================================
o Install Windows for the lowest available resolution of the brand and 
  model of VGA card you are using.  If there is no driver for your
  specific VGA card, install Windows for generic "VGA".

o Start Windows.

o Insert this disk (Utilities and Drivers) into drive A.

o Under the "File" menu of the program manager, choose "Run".

o In the dialog box, type "A:\INSTALL".

o Choose the driver version you would like to install (small or large
  font), then click on "Install".  The small font driver is recommended
  for monitors measuring 17" or more diagonally, and the large font
  driver is recommended for monitors measuring less than 17" diagonally.
  However, either driver will work on any size monitor, so choose
  whichever driver you prefer.

o All necessary files will be copied over to the WINDOWS\SYSTEM directory,
  and the WIN.INI and SYSTEM.INI files will be updated.  You will then be
  asked to "restart Windows".  Windows will restart using the MultiView 24
  driver.

