   LAN Support for AS/400

  This document applies to the EtherExpress(tm) 16, 16TP, 16C, FLASH,
  FLASH TP, FLASHC, MCA, and MCA/TP adapters.  This information is 
  based on a customer report.

  You can use either LANSUP (NDIS-based) or ODINSUP (ODI-based) to 
  connect the EtherExpress 16 simultaneously to an IBM AS/400* and 
  Novell* NetWare* server.  Some customers have reported that LANSUP 
  is slower. ODINSUP and LANSUP are included in the VLMUP2.EXE file 
  on NetWire or CompuServe.
  
  Here are the configuration files when using LANSUP (NDIS-based).
  
  CONFIG.SYS should include
  -------------------------
   DEVICE = \LANMAN\PROTMAN.DOS     
   DEVICE = EXP16.DOS              <NDIS driver
   DEVICE = \AS400\DXMA0MOD.SYS    <v1.35 or later
   DEVICE = \AS400\DXME0MOD.SYS    <v1.35 or later
   DEVICE = C:\PCS\EIMPCS.SYS
   DEVICE = C:\PCS\ECYDDX.SYS
  
  AUTOEXEC.BAT should include
  ---------------------------
   \AS400\NETBIND
   LSL
   LANSUP     < Must be version 1.27 or later
   IPXODI
   NETX or VLM
   C:\PCS\STARTPCS 
  
  PROTOCOL.INI should include
  ---------------------------
   [PROTOCOL MANAGER]
     DRIVERNAME = PROTMAN$
  
   [ETHERNET]
     DRIVERNAME = DXME0$
     BINDINGS = EXP16
  
   [EXP16]
     DRIVERNAME = EXP16$
     IOADDRESS = 0x300
    
  
  
  Here are the configuration files using ODINSUP (ODI-based).
  
  CONFIG.SYS should include
  -------------------------
   DEVICE = \LANMAN\PROTMAN.DOS     
   DEVICE = \AS400\DXMA0MOD.SYS     <Must be version 1.35 or later
   DEVICE = \AS400\DXME0MOD.SYS     <Must be version 1.35 or later
   DEVICE = C:\PCS\EIMPCS.SYS
   DEVICE = C:\PCS\ECYDDX.SYS
  
  AUTOEXEC.BAT should include
  ---------------------------
   LSL
   EXP16ODI
   ODINSUP       < Must be version 1.22 or later
   NETBIND
   IPXODI
   NETX or VLM
   C:\PCS\STARTPCS
  
  PROTOCOL.INI should include
  ---------------------------
   [PROTOCOL MANAGER]
     DRIVERNAME = PROTMAN$
  
   [ETHERNET]
     DRIVERNAME = DXME0$
     BINDINGS = EXP16ODI
  
   [EXP16ODI]
     DRIVERNAME = EXP16ODI$
     IOADDRESS = 0x300
  
  NET.CFG should include
  ----------------------
   Protocol ODINSUP
     Bind EXP16ODI   <--Bind 1, if using IPXODI v2.x or later
  
   Link Driver EXP16ODI
     Port 300
     frame ethernet_802.2
     frame ethernet_ii
     frame ethernet_802.3
     frame ethernet_snap
  
  NetWare DOS Requester   
    First Network Drive=F
                                                                     


* Third-party trademarks are the property of their respective owners.
