

================================================================================
  ADVANCED DIAGNOSTICS FOR IBM PC 5150 Version 1.02  (IBM part number 6081557)
================================================================================
  

This image was created from a 160k diskette using Mike Brutman's DSKIMAGE program. A copy of the program
is included in this archive. The correct command line syntax for writing this disk with DSKIMAGE  is;

Writing the image file to floppy drive A:
-----------------------------------------
DSKIMAGE 6081557.IMG 0:40:1:8       
 
Writing the image file to floppy drive B:
-----------------------------------------
DSKIMAGE 6081557.IMG 1:40:1:8

If the DSKIMAGE.COM program and the 6081557.IMG file are in seperate directories you will need to change the command
to reflect where the image file is at. For example; DSKIMAGE C:\MYSTUFF\6081557.IMG 0:40:1:8  would write the image from 
the "MYSTUFF" directory on drive C:\ to a floppy in drive A. Read the DSKIMAGE.TXT file to better understand. The numbers between 
the colons simply tell the program which floppy, how many tracks on the disk, how many heads(sides)on the disk, and how many sectors per track.

Since this image is in RAW format there are any number of disk image programs that can write this image as long as your floppy
drive can format a 160k diskette. If your floppy drive does not support 160k formats and your image program of choice refuses to
write this image then you can still make the disk with DSKIMAGE.


