
                                  CAMERA LIST

The following list contains all cameras supported by the IMAGE product.


(Last modified: March 12th, 1992)

note: - ASD means that the logical camera works with an ASD and an IMAGE-LC,
      - LC means that it only works for an IMAGE-LC.

List classified by company names:

Company, model:           Description:                 dig:  Logcam file:   #:
------------------------+-----------------------------+------------------------
CIDTECH CID2250         | Non-interlaced asynchronous/| ASD  cid50a4a.cam   11
                        | continuous scan camera      |      cid50a4b.cam   12
                        | with digital sync interface |
COHU 1810               | color camera,interface: RGB | CLD  cohu1810.cam   37
                        | 640H x 480V                 |      
                        |                             |
COHU 6810-5100          | color camera, analog comp.  | ASD  cohu6810.cam  none
                        | video, supplies a TTL clock,|                      
                        | 739H x 484V                 |      
COHU ER1100J, 8400P or  | RS170, digital (RS422) video| ASD  cohuh14m.cam   15 
4110 (4115-1)           | and syncs, 739H x 484V      |      
                        | camera supplies the clock   |
COHU ER1100J, 8400P or  | RS170, digital (RS422) video| ASD  cohu.cam        2
4110 (4115-1)           | and syncs, 739H x 484V      |    
                        | ASD supplies the clock      |
EEV P46580              | CCIR continuous/asynchronous| ASD  eevp465.cam   none
                        | scan camera, analog video   |
                        | TTL syncs, RS422 clk        |      
                        | 578H x 288V in async mode   |
EG&G RETICON LC1901HAN- | line scanner, dotclk up to  | ASD  lc1901.cam     14
011, -HKN-011           | 10 MHz, RS422 syncs,        |
                        | analog differential video   |
                        | >1000H                      |      
I2S IDC121BC-8 & ISM197 | Line scanner, 1020 pixels,  | ASD  i2s121.cam    none
                        | digital(TTL) video, dotclk  |
                        | provided by the ISM197 board|
                        | set to capture 1024 lines.  |
I2S IDC131 & ISM197     | Line scanner, 1712 pixels,  | ASD  i2s131_1.cam    8 
                        | digital(TTL) video, dotclk  | ASD  i2s131_2.cam  none
                        | provided by the ISM197 board| ASD  i2s131_3.cam  none
                        |                             | ASD  i2sls.cam     none 
I2S IDC161 & ISM197     | Line scanner, 3456 pixels,  | ASD  i2s161_1.cam  none
                        | digital (TTL) video, dotclk | ASD  i2s161_2.cam  none
                        | provided by ISM197 board    |      (not tested)
I2S IAC552, IVC552      | RS170, analog composite     | ASD  rs170_lo.cam    0
                        |                             | ASD  rs170_hi.cam    5   
                        |                             | ASD  i2s552_b.cam  none
                        |                             |    
I2S IMC562              | CCIR monoshot/continuous    | ASD  i2sms.cam       9 
                        | scan camera,analog composite| ASD  i2s562_a.cam  none
                        | and TTL syncs               | 
I2S IEC862              | CCIR, analog composite plus | ASD  i2s_800a.cam  none
                        | TTL clock and sync outputs  | ASD  i2s_800b.cam  none
                        | 14.1875 MHz, 736H x 574V    | ASD  i2s_800c.cam  none
                        | electronic shutter          | 
                        |                             | 
I2S IVC800BC            | CCIR, analog composite      | ASD  i2s862.cam    none
                        | 736H x 574V                 |
DAGE-MTI 81             | High resolution analog      | ASD  pa_81dx.cam    10
                        | camera, standard and        | ASD  pa81_2.cam    none
                        | non-standard scan available | ASD  pa81_3.cam    none
                        | TTL sync inputs             | 
JVC TK-F7100U           | sequential color camera     | ASD  jvc7100.cam    19 
                        | (3 consecutive frames per   |
                        | image), progressive scan,   |      
                        | RS170 timings, 1024H x 978V,|
                        | sampling rate 19.66 MHz     |      
PULNIX TM-765           | CCIR timing, interlaced,    | ASD  tm765_1.cam   none
                        | 756H x 581V, sampling rate  | ASD  tm765_2.cam   none
                        | 14.1875 MHz, tm765_2 expects|
                        | the pixel clock from the    |
                        | camera.                     |
SIERRA Visionner 4050   | RS170 camera with optional  |
                        | line scan type output       | ASD  sra_4050.cam  none
                        | dotclk: 11.25 MHz, 592H     |      
                        |                             |
VIDEK MEGAPLUS          | Slow scan/monoshot camera   | ASD  videk.cam       1 
                        | with digital (RS422) video  |      (shells < 2.10)     
                        | and syncs, 1280H x 1024V,   | ASD  videk_1.cam     1
                        | 10 MHz, max. frame rate 7 Hz|      (shells >= 2.10)
                        |                             | ASD  videknew.cam   20      
                        |                             |      (shells < 2.10)
                        |                             | ASD  videk_20.cam   20
                        |                             |      (shells >= 2.10)


List of logical camera files for standards (RS170, NTSC, CCIR, PAL ...):

Standard:                                              dig:  Logcam file:   #:
------------+-----------------------------------------+------------------------
RS170       | Signal and timing are RS170             | ASD  rs170_1.cam   none
            | 524H x 480V, 10 MHz                     | (not /H)
            | The ASD is mapped at the second address |
            | Used with shells versions 1.XX          |      
RS170       | Signal and timing are RS170             | ASD  rs170_2.cam   none
            | 524H x 480V, 10 MHz                     | (not /H)
            | The ASD is mapped at the third address  |
            | Used with shells versions 1.XX          |      
RS170       | Signal and timing are RS170             | ASD  rs170_3.cam   none
            | 524H x 480V, 10 MHz                     | (not /H)
            | The ASD is mapped at the fourth address |
            | Used with shells versions 1.XX          |      
RS170       | Signal and timing are RS170             | ASD  rs170_hi.cam    5
            | 655H x 480V, 12.5 MHz                   |
RS170       | Signal and timing are RS170             | ASD  rs170_lo.cam    0
            | 524H x 480V, 10 MHz                     | (not /H)
RS170       | Signal and timing are RS170             | LC   rs170vhi.cam  none
            | 655H x 480V, 12.5 MHz                   |
            | special logical camera for VCR          |
RS170       | Signal and timing are RS170             | LC   rs170vlo.cam  none
            | 524H x 480V, 10 MHz                     | (not /H)
            | special logical camera for VCR          |
RS170       | Signal and timing are RS170             | ASD  rs170nlo.cam  none
            | 524H x 480V, 10 MHz, configured to      | (not /H)
            | start on next field                     |
RS170       | Signal and timing are RS170             | ASD  rs170nhi.cam  none
            | 655H x 480V, 12.5 MHz, configured to    |
            | start on next field                     |
NTSC        | Signal and timing are NTSC              | CLD  clddbs.cam    none
            | 525H x 480V, 10 MHz, channel #1,        |
            | The CLD double scan mode enabled        |
NTSC        | Signal and timing are NTSC              | CLD  cldnthi.cam   none
            | 640H x 480V, 12.5 MHz, channel #1       |
            | tuned for square pixels                 |
NTSC        | Signal and timing are NTSC              | CLD  cldntsc.cam    32 
            | 525H x 480V, 10 MHz, channel #1         |
NTSC        | Signal and timing are NTSC              | CLD  cldntsc3.cam   35 
            | 525H x 480V, 10 MHz, channel #3         |
NTSC        | Signal and timing are NTSC              | CLD  cldntscn.cam  none 
            | 525H x 480V, 10 MHz, channel #1         |
            | configured to start on next field       |
NTSC Y/C    | Signals and timing are Super VHS        | CLD  cldyc.cam      34 
(SVHS)      | 512H x 480V, 10 MHz                     |
NTSC Y/C    | Signals and timing are Super VHS        | CLD  cldychi.cam   none
(SVHS)      | 640H x 480V, 12.5 MHz (square pixels)   |
RS170 RGB   | Signals and timing are RS170            | CLD  cldrgb.cam     33 
            | 512H x 480V, 10 MHz                     |
RS170 RGB   | Signals and timing are RS170            | CLD  cldrgbn.cam   none
            | 512H x 480V, 10 MHz                     |
            | configured to start on next field       |
PAL I       | Signal and timing are PAL I             | CLD  cldpal_i.cam   36 
            | 768H x 576V, 14.8 MHz, channel #1       |
PAL I RGB   | Signals and timing are PAL I            | CLD  cldpirgb.cam   38 
            | 768H x 576V, 14.8 MHz                   |
PAL I Y/C   | Signals and timing are PAL I Y/C        | CLD  cldpalyc.cam   39 
            | 768H x 576V, 14.8 MHz                   |
CCIR        | Signal and timing are CCIR              | ASD  ccir_43.cam    18
            | 765H x 574V, 14.8 MHz (square pixels)   | (/H only)
            | The ASD PLL needs to be ajusted to      |
            | generate 14.8 MHz.                      |
CCIR        | Signal and timing are CCIR              | ASD  ccir_hi.cam     7
            | 650H x 574V, 12.5 MHz                   |
CCIR        | Signal and timing are CCIR              | ASD  ccir_lo.cam     6
            | 518H x 574V, 10.0 MHz                   | (not /H)
CCIR        | Signal and timing are CCIR              | ASD  ccirv43.cam   none
            | 765H x 574V, 14.8 MHz (square pixels)   | (/H only)
            | The ASD PLL needs to be ajusted to      |
            | generate 14.8 MHz.                      |
            | special logical camera for VCR          |
CCIR        | Signal and timing are CCIR              | ASD  ccirvhi.cam   none
            | 650H x 574V, 12.5 MHz                   |
            | special logical camera for VCR          |
CCIR        | Signal and timing are CCIR              | ASD  ccirvlo.cam   none
            | 518H x 574V, 10.0 MHz                   | (not /H)
            | special logical camera for VCR          |
CCIR        | Signal and timing are CCIR              | ASD  ccirnhi.cam   none
            | 650H x 574V, 12.5 MHz                   |
            | configured to start on next field       |
CCIR        | Signal and timing are CCIR              | ASD  ccirnlo.cam   none
            | 518H x 574V, 10.0 MHz                   | (not /H)
            | configured to start on next field       |



Special logical camera files:

Description:                                           dig:  Logcam file:   #:
------------------------------------------------------+------------------------
Logical camera for the IMAGE-LC programming which     | LC   lcdef.cam      63 
is internally used for compatibility of the ASD       |
logical cameras on an IMAGE-LC.                       |


