	     INSTALLING A NEW VIDEO BIOS IN ROM FOR REACTOR VIDEO CARD




To install the new version of the BIOS in ROM, follow these instructions:

-	Shut down windows and restart the computer in DOS mode. 

-	Change the current directory to the drive and directory 
	containing the program RFLASH4.EXE and your new BIOS file.  
	The BIOS file will have a ".ROM" extension 
	
-	Type "RFLASH4 INGRnn.ROM"  Where nn is the BIOS version number.
		
After the command executes, you will see the prompt return.  Do not be 
concerned if at this point you see some garbled characters.  You must
reboot the system. As the system reboots, you will see a message
that displays the version number of the BIOS just installed. This number will 
be shown as "1.02.nn".  The 'nn' should match the 'nn' in the .ROM file name.
