-------------
Legal Notices
-------------
Copyright 1997, Intergraph Corporation.

All rights reserved.

Including software, file formats, and audio-visual displays; 
may be used pursuant to applicable software license agreement; 
contains confidential and proprietary information of 
Intergraph and/or third parties which is protected by 
copyright and trade secret law and may not be provided or 
otherwise made available without proper authorization.

Restricted Rights Legend
Use duplication, or disclosure by the Government is subject to 
restrictions as set forth in subparagraph (c) (1) (ii) of the 
Rights in Technical Data and Computer Software clause at DFARS 
252.227-7013 or subparagraphs (c) (1) and (2) of Commercial 
Computer Software -- Restricted Rights at 48 CFR 52.227-19, as 
applicable.

Unpublished -- rights reserved under the copyright laws of the 
United States. 
--------------------
End of Legal Notices
--------------------

-------------------
Version Information
-------------------
Product:        Intense 3D 100       
Number:         SHBY110AC-0403A
Version:        04.03.31.33
Date:           December 18, 1997
Description:    BIOS 105 for the Intense 3D 100 Graphics Card
--------------------------
End of Version Information
--------------------------

------------------------------
System Requirements
------------------------------
 IBM PC or compatible 
 Pentium processor 
 8 MB or higher 
 PCI bus slot 
 Windows 95
 CD-ROM drive

--------------------------
End of System Requirements
--------------------------

--------------------------
BIOS FIXES
--------------------------

[BIOS 105]
Fixes the following no-video problem:
TD-22/25/225 systems will not boot with functional video if they have an Intense 3D 100 graphics card
flashed with video BIOS 98, 103 or 103A and also have an Adaptec 2940 PCI SCSI card (Intergraph model
CINF02702). The graphics card loses sync and video just before Windows 95 starts, or just before  the
OS Loader starts on Windows NT or dual-boot systems. The SCSI card must be  removed for the system to
boot with video.


[BIOS 103A]
Refresh Rate too high on Rendition Ready games fixed
Fixed a font problem with certain languages (Swedish, Korean, etc.)
Video is blanked during Speedy3D startup
TR #  289603142, 289603315, 289603344 - Fixed Win95 loss of sync at boot.  (BROWN OUT)
Fixed DDC under Win95 for HCL/HCT test @ MS WHQL.
Fixed mode switching bug when in high refresh
Fixed DDC related problem causing loss of sync during win95 startup using NEC XE17 monitor.

--------------------------
End of BIOS FIXES
--------------------------

------------------------------------
Installing Intense 3D 100 BIOS 105
------------------------------------


-	Shut down windows and restart the computer in DOS mode. 

-	Change the current directory to the drive and directory 
	containing the program RFLASH4.EXE and your new BIOS file.  
	The BIOS file is named PHX2105.ROM 
	
-	Type "RFLASH4 PHX2105.ROM"
		
After the command executes, you will see the prompt return.  Do not be 
concerned if at this point you see some garbled characters.  You must
reboot the system. As the system reboots, you will see a message
that displays the version number of the BIOS just installed. This number will 
be shown as "1.02.105".


-------------------------------------------
End of Installing Intense 3D 100 BIOS 105
-------------------------------------------

-------------
Documentation
-------------
A customer installation Guide is provided in the Intense 3D 100 kit.  
Refer to Microsofts Windows 95 documentation and Help for more information on 
installing drivers, software applications, and configuring your computers video display.

--------------------
End of Documentation
--------------------

---------------------------
Customer Support
---------------------------

Finding Intergraph on the Internet

You can find Intergraph on the Internet in the following ways:
	If you have a World Wide Web browser, use it to visit http://www.intergraph.com.  
	For Intense 3D 100 information and software, visit http://www.intergraph.com/ics/I3D100.  
	
	If you have a File Transfer Protocol (FTP) program, connect to Intergraph at 
	ftp.intergraph.com.  For Intense 3D 100 information and software, go 
	to bbs/consumer/reactor.

	If you have a Gopher program, connect to Intergraph at gopher.intergraph.com.  
	For Intense 3D 100 information and software, go to bbs/consumer/reactor.

	You can get information from Intergraphs email server at info@intergraph.com.  
	Put help in the body of the message (the subject line is ignored) to get 
	information on such subjects as Intergraphs online services and where to 
	get World Wide Web browsers.

Using the Intergraph Bulletin Board Service

Available 24 hours a day, 7 days a week, the Intergraph Bulletin Board 
Service (IBBS) is an electronic forum for Intergraph customers to 
exchange information with Intergraph's technical and marketing staff, 
and with other Intergraph customers.  You can use the IBBS to get 
technical support information, documentation and training 
information, programs, and software updates and fixes.  The IBBS is 
also available for you to give suggestions, make inquiries, and report 
problems.

To connect to the IBBS:
1. Set your systems communications protocol for eight (8) data bits, 
no parity, one (1) stop bit, and any baud rate up to 14,400.
2. Using a modem, dial the IBBS number, 1-205-730-8786.  You 
can dial 1-205-730-6504 if you are using a 2,400 baud connection.
3. When connected, respond to the login request by keying in your 
user ID.  If you have not connected before, key in new to create a 
user ID.
4. Follow the menus to find what you need.  If you are new to 
computer bulletin boards, the IBBS provides clear choices and 
plenty of online help.  A text file that explains IBBS commands 
and organization is available for you to download.
 For Intense 3D 100 information, go to I -- W -- F.

If you have trouble connecting to or using the IBBS, log a problem 
through the Intergraph Customer Response Center (product entry 
IBBS), send a fax to 1-205-730-1110, or leave a message for the 
System Operator (Sysop) at 1-205-730-1413.

Getting Telephone Support
If you cant find what you need in this document, on one of 
Intergraphs Internet sites , or through the FAXLink, you can call the 
Customer Response Center at 1-800-226-4891 during these periods:

Monday through Friday, 7:00 a.m. to 7:00 p.m. Central Time (except holidays)
Saturdays, 9:00 a.m. to 6:00 p.m. Central Time (except holidays)

Have the following information readily available when you call:

The products name (Intense 3D 100).
Your name and telephone number.
A brief description of the question or problem.
System Information - System Vendor & Model # or Motherboard Vendor & Chip Set
		     Manufacturer of System BIOS & Version #


Getting Warranty Service
To obtain warranty service, contact the original place of purchase to 
determine if your Intense 3D 100 board is covered within their 
warranty period.  If the place of purchase warranty period has expired, 
your extended warranty period is covered by Intergraph.  Refer to the 
warranty statement at the beginning of this document for details.
To obtain warranty service from Intergraph, you must return the 
Intense 3D 100 board in its original packaging, along with proof of 
purchase showing the purchase date, and the warranty card (found at 
the beginning of Installation Guide).  You must bear shipping, packaging, 
and insurance costs for delivering the Intense 3D 100 board to 
Intergraph.  Intergraph will provide return shipment to you.

Ship the Intense 3D 100 board to:
Intergraph Corporation
Intense 3D 100 Repair Center
9805 Kellner Road
Huntsville Alabama 35894-0001
(205)730-5599

----------------------
End of Customer Support
-----------------------
 
