
CIPRICO, INC.

RIMFIRE 5500

Data bus: 16-bit, ISA

Size: Full-length, full-height card

Hard drives supported: Up to seven SCSI devices.

Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB

[Image]

                          CONNECTIONS

                  Function                       Location

  34-pin data cable connector-floppy drive          CN1

  50-pin SCSI connector-internal                    CN2

  50-pin SCSI connector-external                    CN3

  4-pin connector-drive active LED                  CN4

                           FLOPPY CONFIGURATION

              Function                    Location            Setting

     Floppy port set to ISA             S1/switch 1            off
      standard values

      Floppy port operates from          S1/switch 1            on
      EEPROM values

                     BIOS AND DUAL PORT MEMORY ADDRESS

          Address            S1/switch 2     S1/switch 3     S1/switch 4

     C8000-CBFFFh               off             on              on

      CA000-CBFFFh / BIOS         on             on              on
      disabled

      CC000-CFFFFh               off             off             on

      CE000-CFFFFh / BIOS         on             off             on
      disabled

      D8000-DBFFFh               off             on              off

      DA000-DBFFFh / BIOS         on             on              off
      disabled

      DC000-DFFFFh               off             off             off

      DE000-DFFFFh / BIOS         on             off             off
      disabled

                                STATUS LEDS

          LED                               Definition

      LED 1-Yellow        DMA transfer in progress

      LED 2-Yellow        Adapter has queued commands

      LED 3-Yellow        Adapter is idle and waiting on host

       LED 4-Red          Self-Test. Fails if flashing continues or stays
                          on for extended period.

      LED 5-Green         Adapter is processing command

