
DATAMAN SYSTEMS

DMS2000-M1

Data bus: 16-bit, ISA

Size: Half-length, full-height card

Hard drives supported: Two MFM ST506/412 drives

Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB

[Image]

                           CONNECTIONS

                  Function                        Location

  34-pin data cable connector-floppy drive           J1

  34-pin control cable connector-hard drive          J2

  20-pin data cable connector-drive 0                J3

  20-pin data cable connector-drive 1                J4

  4-pin connector-drive active LED                   J5

                       MISCELLANEOUS TECHNICAL NOTES

       The DMS2000-M1 has no jumpers to configure. This controller is
         compatible with the Western Digital WD1003-WA2. One minor
  incompatibility exists between these two controllers. If the hard drive
   contains more than eight heads, the WD1003-WA2 numbers heads 8 through
    15 as 0 through 7 in the medias ID fields. The DMS2000-M1 controller
   numbers heads 8 through 15 as 8 through 15. You must reformat the hard
    disk if you are replacing a WD1003-WA2 due to this incompatibility.

   This problem is not manifested in drives with less than eight heads.

