
SILICON VALLEY COMPUTER INC.

ADP111V

  Data bus:                   32-bit, VL-bus

  Size:                       Full-length, full-height card

  Hard drive supported:       (2) IDE(AT) interface drives, (2) IDE
                              mirror drives, IDE tape drive

  Floppy drives supported:    360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                                CONNECTIONS

                   Function                             Location

  9-pin serial port 1 - internal                          COM1

  9-pin serial port 2 - external                          COM2

  15-pin connector - game port                            GAME1

  4-pin connector - Mirror drive active LED                J1

  4-pin connector - primary drive active LED               J2

  40-pin connector - IDE mirror drive cable                J3

  40-pin IDE(AT) interface connector                       J4

  40-pin ISA IDE tape/IDE CD-ROM interface                 P1
  connector

  34-pin control cable connector - floppy                  P2
  drive

  4-pin connector - IDE tape/IDE CD-ROM drive              P3
  active LED

  25-pin parallel port - external                          P4

                        USER CONFIGURABLE SETTINGS

               Function                  Location           Setting

      8051/8031 micro controller is         E1          pins 1 & 2, 3 & 4
      installed                                              closed

      80C51/80C31 micro controller          E1         pins 2 & 3 closed
      is installed

     Serial port 2 enabled                 E3         pins 2 & 3 closed

      Serial port 2 disabled                E3         pins 1 & 2 closed

     Parallel port enabled                 E4         pins 2 & 3 closed

      Parallel port disabled                E4         pins 1 & 2 closed

                   USER CONFIGURABLE SETTINGS(CONTINUED)

               Function                    Location          Setting

     ISA IDE interface enabled               E5            pins 2 & 3
                                                              closed

      ISA IDE interface disabled              E5            pins 1 & 2
                                                              closed

     Floppy drive interface enabled          E6            pins 2 & 3
                                                              closed

      Floppy drive interface disabled         E6            pins 1 & 2
                                                              closed

     Serial port 2 address 2F8 -             E7            pins 2 & 3
      2EFh select                                             closed

      Serial port 2 address 2E8 -             E7            pins 1 & 2
      2EFh select                                             closed

     Serial port 1 address 3F8 -             E8            pins 2 & 3
      3FFh select                                             closed

      Serial port 1 address 3E8 -             E8            pins 1 & 2
      3EFh select                                             closed

     Serial port 1 enabled                   E9            pins 2 & 3
                                                              closed

      Serial port 1 disabled                  E9            pins 1 & 2
                                                              closed

     Parallel port address 378 -            E10            pins 2 & 3
      37Fh select                                             closed

      Parallel port address 278 -            E10            pins 1 & 2
      27Fh select                                             closed

     Game port enabled                   E11 & E12           closed

      Game port disabled                  E11 & E12            open

     ISA IDE tape drive interrupt           E13            pins 2 & 3
      IRQ15 select                                            closed

      ISA IDE tape drive interrupt           E13            pins 1 & 2
      IRQ10 select                                            closed

      ISA IDE tape drive interrupt           E13            pins 4 & 5
      IRQ14 select(do not use)                                closed

     VESA IDE interface interrupt           E13            pins 5 & 6
      IRQ14 select                                            closed

      VESA IDE interface interrupt           E13            pins 6 & 7
      IRQ15 select(do not use)                                closed

      Factory configured - do not            S1/4              N/A
      alter

      Factory configured - do not            S1/5              N/A
      alter

     External BIOS enabled                  S1/6              off

      Internal BIOS enabled                  S1/6               on

     Factory configured - do not            S1/7              N/A
      alter

     Factory configured - do not            S1/8              N/A
      alter

     Factory configured - do not           SW1/4               on
      alter

                        BASE MEMORY ADDRESS SELECT

            Address                    S1/1                  S1/2

             CC000h                    on                    off

              D8000h                    off                   on

              DC000h                    off                   off

             Disabled                   on                    on

                                 BIOS SIZE

           Size                       E2                     S1/3

             8KB                    open                     on

              16KB                  closed                   off

            Note: The manufacturer recommends that the default value of
            8KB should not be changed by the user.

                         DATA TRANSFER RATE TABLE

                       CPU Speed/Type

    Setting            25/DX2-50 MHz          33/DX-66 MHz       50MHz

       0                    1.67                  2.22           3.33

       1                    2.00                  2.66           4.00

       2                    2.50                  3.33           5.00

       3                    2.94                  3.92           5.88

       4                    3.12                  4.60           6.25

       5                    4.16                  5.55           8.33

       6                    4.54                  6.06           9.09

       7                    6.25                  8.33           12.50

    DATA TRANSFER RATE SWITCH SETTINGS

  Setting    SW1/1      SW1/2      SW1/3

     0         on         on        on

     1         on         on        off

     2         on        off        on

     3         on        off        off

     4        off         on        on

     5        off         on        off

     6        off        off        on

     7        off        off        off

