
MULTIBEST INDUSTRIAL & MANUFACTURING INC.

TRUMP CARD

Data bus: 16-bit, ISA

Size: Half-length, full-height card

Hard drives supported: Two AT Interface (IDE) drives

Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB

[Image]

                          CONNECTIONS

                    Function                       Location

  40-pin AT Interface (IDE) connector-internal        J1

  34-pin control cable connector floppy drive         J2

  25-pin parallel port (LPT1/2)-external              J3

  9-pin serial port (COM1/3) external                 J4

  9-pin serial port (COM2/4) internal                 J5

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Hard drive enabled                     JP2B              closed

      Hard drive disabled                    JP2B               open

     Single speed floppy drives             JP2E               open

      Dual speed floppy drives               JP2E              closed

     Direct IRQ                             JP2F            pins 1 & 2
                                                               closed

      Delay IRQ (used when drive has         JP2F            pins 2 & 3
      difficulty)                                              closed

    FLOPPY DRIVE CONFIGURATION

  Function     JP2C        JP2D

  Enabled     closed      closed

  Disabled     open        open

                        PARALLEL PORT CONFIGURATION

        LPT               JP1A              JP1B               JP2A

   LPT1 enabled         pins 2 & 3         closed              open
                         closed

   LPT2 enabled         pins 1 & 2         closed             closed
                         closed

     Disabled           pins 1 & 2          open            pins 1 & 2
                         closed                               closed

                         SERIAL PORT CONFIGURATION

          Port 1                 JP1C & JP1D             JP1E & JP1F

          COM1 (CN4)                N/A              pins 1 & 2 closed

           COM3 (CN4)                N/A              pins 2 & 3 closed

           COM2 (CN5)         pins 1 & 2 closed              N/A

           COM4 (CN5)         pins 2 & 3 closed              N/A

