
PROMISE TECHNOLOGY, INC.

DC99, DC99M

Data bus: 16-bit, ISA

Size: Half-length, full-height card

Hard drives supported: Two AT Interface (IDE) drives

Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB

[Image]

                            CONNECTIONS

                   Function                          Location

  40-pin AT Interface (IDE) connector                   J1

  34-pin control cable connector-floppy drive           J2

  4-pin connector-drive active LED                     JP1

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Floppy drive enabled                    JP2            pins 1 & 2
                                                              closed

      Floppy drive disabled                   JP2            pins 1 & 2
                                                               open

     Factory configured - do not             JP2            pins 3 & 4
      alter                                                    open

                            CACHE CONFIGURATION

                Size                                 Cache

                512KB                             (2) 256K x 9

                 2MB                               (2) 1M x 9

                 8MB                               (2) 4M x 9

       Note:When configuring the cache, both SIMM sockets must be
       occupied with identical SIMM's; i.e.: two 256KB, 1MB, or 4MB
       SIMM's. The modules may be 8 or 9-bits wide and must be 80nsec or
       faster.

                       MISCELLANEOUS TECHNICAL NOTES

   Warning: Do not reset or power-down the system while the drive active
                LED is lit! Data in cache RAM will be lost!

