
UNIDENTIFIED

EHDI 8302

Data bus: 16-bit, ISA

Size: Half-length, half-height card

Hard drives supported: Two IDE (AT) interface drives

Floppy drives supported: None

[Image]

                    CONNECTIONS

  4-pin connector-drive active LED         CN1

  40-pin IDE (AT) Interface connector      CN2

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Hard drive port address is              JP1              open
      1F0-1F7h, 3F6-3F7h

      Hard drive port address is              JP1             closed
      170-177h, 376-377h

     Gate I/O channel ready is over          JP2             closed
      12 MHz

      Gate I/O channel ready is               JP2              open
      under 12MHz

     Factory configured - do not             JP3              open
      alter

     Factory configured - do not             JP4             closed
      alter

        MISCELLANEOUS TECHNICAL NOTES

  This controller has no on-board software.

