
PINE TECHNOLOGY

PT-604A

Data bus:                16-bit ISA
Size:                    Half-length, full-height card
Hard drive supported:    Two IDE (AT) Interface drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, 1.44MB drives

[Image]

                            CONNECTIONS

                   Function                          Location

  10-pin serial port internal                          CN1

  10-pin serial port external                          CN2

  25-pin parallel port external                        CN3

  34-pin control cable connector floppy drive          CN4

  40-pin IDE (AT) Interface connector                  CN5

  16-pin game port internal                            CN6

  2-pin connector - Drive active LED                   JP10

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

     Hard drive enabled                     JP1             Pins 1 & 2
                                                              closed

      Hard drive disabled                    JP1             Pins 2 & 3
                                                              closed

     Floppy drive enabled                   JP3             Pins 1 & 2
                                                              closed

      Floppy drive disabled                  JP3             Pins 2 & 3
                                                              closed

     Parallel Port IRQ7                     IRQ             Pins 2 & 3
                                                              closed

      Parallel Port IRQ5                     IRQ             Pins 1 & 2
                                                              closed

                      SERIAL PORTS INTERRUPT REQUEST

    Port 1         Port 1         JP2        JP5        JP7        JP8

     COM1           COM2        Pins 1 &   Pins 1 &   Pins 1 &   Pins 1 &
                                   2          2          2          2

     COM1           COM4        Pins 1 &    Pins 1    Pins 2 &   Pins 1 &
                                   2         &2          3          2

     COM3           COM2        Pins 1 &   Pins 1 &   Pins 1 &   Pins 2 &
                                   2          2          2          3

     COM3           COM4        Pins 1 &    Pins 1    Pins 2 &   Pins 2 &
                                   2         &2          3          3

     COM1         Disabled      Pins 2 &   Pins 1 &   Pins 1 &   Pins 1 &
                                   3          2          2          2

     COM1         Disabled      Pins 2 &   Pins 1 &   Pins 2 &   Pins 1 &
                                   3          2          3          2

     COM1         Disabled      Pins 2 &   Pins 1 &   Pins 1 &   Pins 2 &
                                   3          2          2          3

     COM1         Disabled      Pins 2 &   Pins 1 &   Pins 2 &   Pins 2 &
                                   3          2          3          3

   Disabled         COM2        Pins 1 &   Pins 2 &   Pins 1 &   Pins 1 &
                                   2          3          2          2

   Disabled         COM4        Pins 1 &   Pins 2 &   Pins 1 &   Pins 1 &
                                   2          3          2          2

   Disabled         COM2        Pins 1 &   Pins 2 &   Pins 1 &   Pins 2 &
                                   2          3          2          3

   Disabled         COM4        Pins 1 &   Pins 2 &   Pins 2 &   Pins 2 &
                                   2          3          3          3

   Disabled       Disabled      Pins 2 &   Pins 2 &   Pins 1 &   Pins 1 &
                                   3          3          2          2

   Disabled       Disabled      Pins 2 &   Pins 2 &   Pins 2 &   Pins 1 &
                                   3          3          3          2

   Disabled       Disabled      Pins 2 &   Pins 2 &   Pins 1 &   Pins 2 &
                                   3          3          2          3

   Disabled       Disabled      Pins 2 &   Pins 2 &   Pins 2 &   Pins 2 &
                                   3          3          3          3

  Note: Pins designated are closed.

                        PARALLEL PORT CONFIGURATION

             LPT                      JP4                    JP6

             LPT1             Pins 1 & 2 closed      Pins 1 & 2 closed

              LPT2             Pins 2 & 3 closed      Pins 1 & 2 closed

            Disabled           Pins 1 & 2 closed      Pins 2 & 3 closed

            Disabled           Pins 2 & 3 closed      Pins 2 & 3 closed

      FACTORY SETTINGS

  Jumper        Setting

   JS1            N/A

   JS2            N/A

   JS3            N/A

   JS4            N/A

