
GOLDSTAR ELECTRONICS INTERNATIONAL, INC.

PRIME 2 IDE I/O CARD

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE(AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                     Function                            Location

  9-pin serial port 1 (COM1/3) - external                  CN1

  10-pin serial port 2 (COM2/4) - internal                 CN2

  25-pin parallel port (LPT1/2) - external                 CN3

  34-pin control cable connection - floppy drive           CN4

  40-pin IDE(AT) Interface connector                       CN5

  15-pin game port - internal                              CN6

  2-pin connector - Drive Active LED                       J13

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Floppy drive enabled                    J1             pins 1 & 2
                                                              closed

      Floppy drive disabled                   J1             pins 2 & 3
                                                              closed

     Floppy drive port address is            J2             pins 1 & 2
      3F0-3F7h                                                closed

      Floppy drive port address is            J2             pins 2 & 3
      370-377h                                                closed

     Hard drive enabled                      J3             pins 1 & 2
                                                              closed

      Hard drive disabled                     J3             pins 2 & 3
                                                              closed

     AT Hard drive port address is           J4             pins 1 & 2
      1F0-1F7 & 3F6-3F7h                                      closed

      AT Hard drive port address is           J4             pins 2 & 3
      170-177 & 376-377h                                      closed

     XT hard drive port address is           J5             pins 1 & 2
      320-323h                                                closed

      XT Hard drive port address is           J5             pins 2 & 3
      324-327h                                                closed

     IDE(AT) drives supported                J6             pins 1 & 2
                                                              closed

      IDE(XT) drives supported                J6             pins 2 & 3
                                                              closed

     Serial port 1 enabled                   J7             pins 1 & 2
                                                              closed

      Serial port 1 disabled                  J7             pins 2 & 3
                                                              closed

     Serial port 1 set to COM1 and           J8             pins 1 & 2
      IRQ4                                                    closed

      Serial port 1 set to COM3 and           J8             pins 2 & 3
      IRQ4                                                    closed

     Serial port 2 enabled                   J9             pins 1 & 2
                                                              closed

      Serial port 2 disabled                  J9             pins 2 & 3
                                                              closed

     Serial port 2 set to COM2 and          J10             pins 1 & 2
      IRQ3                                                    closed

      Serial port 2 set to COM3 and          J10             pins 2 & 3
      IRQ3                                                    closed

     Parallel port enabled                  J11             pins 1 & 2
                                                              closed

      Parallel port disabled                 J11             pins 2 & 3
                                                              closed

     Parallel port set to LPT1 and          J12             pins 1 & 2
      IRQ7                                                    closed

      Parallel port set to LPT2 and          J12             pins 2 & 3
      IRQ7                                                    closed

