
UNIDENTIFIED

GW2760WX SUPER I/O CARD

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE(AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                     Function                            Location

  40-pin IDE(AT) Interface connector                       CN1

  34-pin control cable connection - floppy drive           CN2

  15-pin game port - external                              CN3

  25-pin parallel port (LPT1/2) - external                 CN4

  2-pin connector - Drive Active LED                       CN5

  10-pin serial port 1 (COM1/3) - internal                 CN6

  10-pin serial port 2 (COM2/4) - internal                 CN7

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

     Floppy drive enabled                   JP1             pins 2 & 3
                                                              closed

      Floppy drive disabled                  JP1             pins 1 & 2
                                                              closed

     Hard drive enabled                     JP2             pins 2 & 3
                                                              closed

      Hard drive disabled                    JP2             pins 1 & 2
                                                              closed

     Serial port 1 set to IRQ4              JP9             pins 2 & 3
                                                              closed

      Serial port 1 set to IRQ3              JP9             pins 1 & 2
                                                              closed

     Serial port 2 set to IRQ3             JP10             pins 1 & 2
                                                              closed

      Serial port 2 set to IRQ4             JP10             pins 2 & 3
                                                              closed

     Parallel port set to IRQ7             JP11             pins 1 & 2
                                                              closed

      Parallel port set to IRQ5             JP11             pins 2 & 3
                                                              closed

                        SERIAL PORT 1 CONFIGURATION

              COM                   Jumper JP3            Jumper JP4

             Disabled            pins 1 & 2 closed     pins 1 & 2 closed

         COM1 (3F8-3FFh)        pins 2 & 3 closed     pins 1 & 2 closed

          COM3 (3E8-3EFh)        pins 1 & 2 closed     pins 2 & 3 closed

          COM4 (2E8-2EFh)        pins 2 & 3 closed     pins 2 & 3 closed

                        SERIAL PORT 2 CONFIGURATION

              COM                   Jumper JP5            Jumper JP6

             Disabled            pins 1 & 2 closed     pins 1 & 2 closed

         COM2 (2F8-2FFh)        pins 2 & 3 closed     pins 1 & 2 closed

          COM4 (2E8-2EFh)        pins 1 & 2 closed     pins 2 & 3 closed

          COM3 (3E8-3EFh)        pins 2 & 3 closed     pins 2 & 3 closed

                        PARALLEL PORT CONFIGURATION

              LPT                   Jumper JP7            Jumper JP8

             Disabled            pins 1 & 2 closed     pins 1 & 2 closed

          LPT3 (278-27Fh)        pins 2 & 3 closed     pins 1 & 2 closed

         LPT2 (378-37Fh)        pins 1 & 2 closed     pins 2 & 3 closed

          LPT1 (3BC-3BFh)        pins 2 & 3 closed     pins 2 & 3 closed

