
UNIDENTIFIED

6624UG SUPER I/O

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE(AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                            CONNECTIONS

                   Function                          Location

  2-pin connector - Drive active LED                   CN1

  16-pin game port - internal                          CN2

  40-pin IDE(AT) Interface connector                   CN3

  34-pin control cable connector-floppy drive          CN4

  10-pin serial port (COM2/4) - internal               CN5

  10-pin serial port (COM1/3) - external               CN6

  25-pin parallel port (LPT1/2) - external             CN7

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Game port enabled                       JP1            pins 1 & 2
                                                              closed

      Game port disabled                      JP1            pins 2 & 3
                                                              closed

     Hard drive enabled                      JP2            pins 1 & 2
                                                              closed

      Hard drive disabled                     JP2            pins 2 & 3
                                                              closed

     Floppy drive enabled                    JP3            pins 1 & 2
                                                              closed

      Floppy drive disabled                   JP3            pins 2 & 3
                                                              closed

     Serial Port 1 is set to COM1            JP4            pins 1 & 2
                                                              closed

      Serial Port 1 is set to COM3            JP4            pins 2 & 3
                                                              closed

     Serial Port 1 enabled                   JP5            pins 1 & 2
                                                              closed

      Serial Port 1 disabled                  JP5            pins 2 & 3
                                                              closed

     Serial Port 2 is set to COM2            JP6            pins 1 & 2
                                                              closed

      Serial Port 2 is set to COM4            JP6            pins 2 & 3
                                                              closed

     Serial Port 2 enabled                   JP7            pins 1 & 2
                                                              closed

      Serial Port 2 disabled                  JP7            pins 2 & 3
                                                              closed

     Parallel port is set to LPT2            JP8            pins 1 & 2
                                                              closed

      Parallel port is set to LPT3            JP8            pins 2 & 3
                                                              closed

     Parallel port enabled                   JP9            pins 1 & 2
                                                              closed

      Parallel port disabled                  JP9            pins 2 & 3
                                                              closed

     I/O Channel Ready disabled             JP10              open

      I/O Channel Ready enabled              JP10             closed

     Hard drive controller                   JX1            pins 1 & 2
      installation installed                                  closed

      Hard drive controller                   JX1            pins 2 & 3
      installation not installed                              closed

      IDE drive mode is XT                    JX2            pins 1 & 2
                                                              closed

     IDE drive mode is AT                    JX2            pins 2 & 3
                                                              closed

     Hard drive port address is              JX3            pins 1 & 2
      1F0-1F7h                                                closed

      Hard drive port address is              JX3            pins 2 & 3
      170-177h                                                closed

     Floppy drive port address is            JX4            pins 1 & 2
      3F0-3F7h                                                closed

      Floppy drive port address is            JX4            pins 2 & 3
      370-377h                                                closed

