
KIMPSION INTERNATIONAL

IDE3 - AT BUS/FLOPPY DISK CONTROLLER

Data bus:                16-bit, ISA
Size:                    Half-length, full-height card
Hard drive supported:    Two IDE (AT) Interface drives
Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                            CONNECTIONS

                   Function                          Location

  40-pin AT Interface (IDE) connector                   J1

  34-pin control cable connector-floppy drive           J4

  4-pin connector-Drive active LED                      J6

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Hard drive Interrupt is IRQ14          JP2             Pins 2 & 3
                                                              closed

      Hard drive Interrupt is                JP2             Pins 1 & 2
      disabled                                                closed

     1.2MB floppy drive support             JP3             Pins 2 & 3
      enabled                                                 closed

      360KB floppy drive support             JP3             Pins 1 & 2
      enabled                                                 closed

     Floppy drive enabled                   JP7             Pins 2 & 3
                                                              closed

      Floppy drive disabled                  JP7             Pins 1 & 2
                                                              closed

     Hard drive enabled                     JP8             Pins 1 & 2
                                                              closed

      Hard drive disabled                    JP8             Pins 2 & 3
                                                              closed

