
ADVANCED INTEGRATION RESEARCH, INC.

IDE-3V

 Data bus:                32-bit, VL-bus

 Size:                    Three/quarter-length, half-height card

 Hard drive supported:    Two IDE (AT) Interface drives

 Floppy drives            Two 360KB, 720KB, 1.2MB, or 1.44MB drives
 supported:

[Image]

                              CONNECTIONS

                    Function                           Location

  40-pin IDE(AT) Interface connector                      CN1

  2-pin connector - Drive active LED                      JP6

  34-pin control cable connector - floppy drive           CN2

  15-pin game port - internal                             CN3

  10-pin serial port (COM1/3) - internal                  CN4

  10-pin serial port (COM2/4) - internal                  CN5

  25-pin parallel port (LPT1/2) - external                CN6

                        USER CONFIGURABLE SETTINGS

               Function
                                            Location
                                                              Setting


      Motherboard with SIS 460/461
      chip
                                              JP2
                                                             pins 2 & 3
                                                               closed


      Motherboard with other chips
                                              JP2
                                                             pins 1 & 2
                                                               closed

  
      Floppy drive enabled
                                              JP16
                                                             pins 1 & 2
                                                               closed


      Floppy drive disabled
                                              JP16
                                                             pins 2 & 3
                                                               closed

  
      Game Port (CN3) enabled
                                              JP19
                                                             pins 1 & 2
                                                               closed


      Game Port (CN3) disabled
                                              JP19
                                                             pins 2 & 3
                                                               closed

                              IDE ACTIVE TIME

      Function              JP3               JP4               JP5

        4T (at 33       pins 1 & 2        pins 2 & 3        pins 2 & 3
           MHz)            closed            closed           closed

         9T (at 50       pins 2 & 3        pins 1 & 2        pins 1 & 2
           MHz)            closed            closed           closed

                        HARD DRIVE ENABLED/DISABLED

           Select
                                       JP7
                                                             JP12

  
      Hard drive enable
                                pins 1 & 2 closed
                                                       pins 2 & 3 closed


      Hard drive disable
                                pins 2 & 3 closed
                                                       pins 1 & 2 closed

                             IDE RECOVERY TIME

     Time          VL-bus         JP8            JP9            JP10
                   clock

    9T (low       33 MHz       pins 2 & 3     pins 1 & 2      pins 2 & 3
    speed)                       closed         closed         closed

    7T (mid       33 MHz       pins 1 & 2     pins 2 & 3      pins 2 & 3
     speed                       closed         closed         closed

    5T (high      33 MHz       pins 2 & 3     pins 2 & 3      pins 2 & 3
    speed)                       closed         closed         closed

    13T (low      50 MHz       pins 2 & 3     pins 2 & 3      pins 1 & 2
    speed)                       closed         closed         closed

    11T (mid      50 MHz       pins 1 & 2     pins 1 & 2      pins 2 & 3
    speed)                       closed         closed         closed

    9T (high      50 MHz       pins 2 & 3     pins 1 & 2      pins 2 & 3
    speed)                       closed         closed         closed

                     PARALLEL PORT (CN6) CONFIGURATION

              LPT
                                        JP11
                                                              JP17

  
          LPT1 (378-37Fh)
                                 pins 1 & 2 closed
                                                       pins 1 & 2 closed


          LPT2 (278-27Fh)
                                 pins 1 & 2 closed
                                                       pins 2 & 3 closed


              Disabled
                                 pins 2 & 3 closed
                                                              n/a

                     SERIAL PORT 1 (CN4) CONFIGURATION

              COM                       JP13                  JP14

         COM1 (3F8-3FFh)        pins 1 & 2 closed     pins 1 & 2 closed

          COM3 (3E8-3EFh)        pins 1 & 2 closed     pins 2 & 3 closed

              disabled           pins 2 & 3 closed            n/a

                     SERIAL PORT 2 (CN5) CONFIGURATION

              COM
                                        JP15
                                                              JP18

  
          COM2 (2F8-2FFh)
                                 pins 1 & 2 closed
                                                       pins 1 & 2 closed


          COM4 (2E8-2EFh)
                                 pins 1 & 2 closed
                                                       pins 2 & 3 closed


              disabled
                                 pins 2 & 3 closed
                                                              n/a

          MISCELLANEOUS TECHNICAL NOTES

  The function of jumper JP1 is not documented.

          T = Tick = Approx. .055 sec.

