
UNIDENTIFIED

SUPER I/O

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  2-pin connector - Drive active LED                      CN1

  15-pin game port - internal                             CN2

  40-pin IDE(AT) Interface connector                      CN3

  34-pin control cable connector - floppy drive           CN4

  10-pin serial port (COM2/4) - internal                  CN5

  10-pin serial port (COM1/3) - external                  CN6

  25-pin parallel port (LPT2/3) - external                CN7

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

     Game port enabled                      JP1             pins 1 & 2
                                                              closed

      Game port disabled                     JP1             pins 2 & 3
                                                              closed

     Hard drive enabled                     JP2             pins 1 & 2
                                                              closed

      Hard drive disabled                    JP2             pins 2 & 3
                                                              closed

     Floppy drive enabled                   JP3             pins 1 & 2
                                                              closed

      Floppy drive disabled                  JP3             pins 2 & 3
                                                              closed

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Serial Port 1 (CN6) is set to           JP4            pins 1 & 2
      COM1                                                    closed

      Serial Port 1 (CN6) is set to           JP4            pins 2 & 3
      COM3                                                    closed

     Serial Port 1 (CN6) enabled             JP5            pins 1 & 2
                                                              closed

      Serial Port 1 (CN6) disabled            JP5            pins 2 & 3
                                                              closed

     Serial Port 2 (CN5) is set to           JP6            pins 1 & 2
      COM2                                                    closed

      Serial Port 2 (CN5) is set to           JP6            pins 2 & 3
      COM4                                                    closed

     Serial Port 2 (CN5) enabled             JP7            pins 1 & 2
                                                              closed

      Serial Port 2 (CN5) disabled            JP7            pins 2 & 3
                                                              closed

     Parallel Port (CN7) is set to           JP8            pins 1 & 2
      LPT2                                                    closed

      Parallel Port (CN7) is set to           JP8            pins 2 & 3
      LPT3                                                    closed

     Parallel Port (CN7) enabled             JP9            pins 1 & 2
                                                              closed

      Parallel Port (CN7) disabled            JP9            pins 2 & 3
                                                              closed

     I/O Channel Ready signal               JP10              open
      disabled

      I/O Channel Ready signal               JP10             closed
      enabled

     Hard drive controller                   JX1            pins 1 & 2
      installation installed                                  closed

      Hard drive controller                   JX1            pins 2 & 3
      installation not installed                              closed

     AT-compatible mode enabled              JX2            pins 1 & 2
                                                              closed

      XT-compatible mode enabled              JX2            pins 2 & 3
                                                              closed

     Hard drive port address is              JX3            pins 1 & 2
      1F0-1F7, 3F6, 3F7h                                      closed

      Hard drive port address is              JX3            pins 2 & 3
      170-177, 376, 377h                                      closed

     Floppy drive port address is            JX4            pins 1 & 2
      3F2-3F5, 3F7, 1F7h                                      closed

      Floppy drive port address is            JX4            pins 2 & 3
      372-375, 377, 177h                                      closed

