
TOOLMAKER, INC.

TIE-1200

  Data bus:                  16-bit, ISA

  Size:                      Full-length, full-height card

  Hard drive supported:      Up to seven SCSI devices

  Floppy drives supported:   None

[Image]

                               CONNECTIONS

                     Function                             Location

  4-pin connector - Drive active LED                        CN1

  4-pin RJ11 Chipcard Reader connector - internal           CN2

  50-pin SCSI connector - internal                          CN3

  4-pin RJ11 Chipcard Reader connector - external           CN4

  50-pin SCSI connector - external                          CN5

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

     I/O port address is 310h           J1/switch 1            on

      I/O port address is 350h           J1/switch 1            off

     TTL Chipcard Reader enabled     J2/jumpers 1 - 6       pins 1 & 2
                                                              closed

      RS-232 Chipcard Reader          J2/jumpers 1 - 6       pins 2 & 3
      enabled                                                 closed

                                STATUS LEDS

           Status               LED 4      LED 3      LED 2       LED 1

    Reset after power on         on         on          on         on

          RAM test               on         on          on         off

        DES chip test            on         on         off         on

   Internal software test        on         on         off         off

  TIE-1200 in download mode      on         off         on         on

   Download mode (service)       on         off         on         off

  Wrong transaction number       on         off        off         on

  Download post processing       on         off        off         off

   Internal program start        off        on          on         on

       Software loaded           off        on          on         off

  TIE diagnostic information     off        on         off         on

  TIE diagnostic information     off        on         off         off

  TIE diagnostic information     off        off         on         on

  TIE diagnostic information     off        off         on         off

      TIE-1200 installed         off        off        off         on
       (blinking LED)

                       MISCELLANEOUS TECHNICAL NOTES

     J1/switches 2 - 4 are factory-configured to "on" position - do not
                                  alter.

