
PC WARE INTERNATIONAL, INC.

V-U40821 I/O

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  40-pin IDE(AT) Interface connector                      CN1

  34-pin control cable connector - floppy drive           CN2

  10-pin serial port (COM1/3) - internal                  CN3

  10-pin serial port (COM2/4) - internal                  CN4

  15-pin game port - internal                             CN5

  26-pin VESA feature connector - internal                CN6

  15-pin VGA analog video port - external                 CN7

  25-pin parallel port (LPT2/3) - external                CN8

  2-pin drive active LED                                  J2

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     I/O Channel Ready signal                J1               open
      disabled

      I/O Channel Ready signal                J1              closed
      enabled

     VGA port Interrupt Request              J3               open
      IRQ2 disabled

      VGA port Interrupt Request              J3              closed
      IRQ2 enabled

     Serial Port 2 (CN4) is set to          JP1             pins 1 & 2
      COM2                                                    closed

      Serial Port 2 (CN4) is set to          JP1             pins 2 & 3
      COM4                                                    closed

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Serial Port 1 (CN3) enabled             JP2            pins 1 & 2
                                                              closed

      Serial Port 1 (CN3) disabled            JP2            pins 2 & 3
                                                              closed

     Serial Port 2 (CN4) enabled             JP3            pins 1 & 2
                                                              closed

      Serial Port 2 (CN4) disabled            JP3            pins 2 & 3
                                                              closed

     Game Port (CN5) enabled                 JP4            pins 1 & 2
                                                              closed

      Game Port (CN5) disabled                JP4            pins 2 & 3
                                                              closed

     Parallel Port (CN8) is set to           JP5            pins 1 & 2
      LPT2                                                    closed

      Parallel Port (CN8) is set to           JP5            pins 2 & 3
      LPT3                                                    closed

     Parallel Port (CN8) enabled             JP6            pins 1 & 2
                                                              closed

      Parallel Port (CN8) disabled            JP6            pins 2 & 3
                                                              closed

     Hard drive controller                   JP7            pins 1 & 2
      installation exists                                     closed

      Hard drive controller                   JP7            pins 2 & 3
      installation does not exist                             closed

     Serial Port 1 (CN3) is set to           JP8            pins 1 & 2
      COM1                                                    closed

      Serial Port 1 (CN3) is set to           JP8            pins 2 & 3
      COM3                                                    closed

     Hard drive enabled                      JP9            pins 1 & 2
                                                              closed

      Hard drive disabled                     JP9            pins 2 & 3
                                                              closed

     Floppy drive enabled                   JP10            pins 1 & 2
                                                              closed

      Floppy drive disabled                  JP10            pins 2 & 3
                                                              closed

