
UNIDENTIFIED

GW2760PX

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  2-pin connector - drive active LED                      CN1

  40-pin IDE (AT) Interface connector                     CN2

  34-pin control cable connector - floppy drive           CN3

  10-pin serial port 1 (COM1/3) - internal                CN4

  10-pin serial port 2 (COM2/4) - internal                CN5

  15-pin game port - external                             CN6

  25-pin parallel port (LPT2/3) - external                CN7

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

     Floppy drive port address is           JP1             pins 1 & 2
      3F0-3F7h                                                closed

      Floppy drive port address is           JP1             pins 2 & 3
      370-377h                                                closed

     Hard drive enabled                     JP2             pins 1 & 2
                                                              closed

      Hard drive disabled                    JP2             pins 2 & 3
                                                              closed

     Serial Port 1 (CN4) enabled            JP3             pins 1 & 2
                                                              closed

      Serial Port 1 (CN4) disabled           JP3             pins 2 & 3
                                                              closed

     Serial Port 1 (CN4) is set to          JP4             pins 1 & 2
      COM1 (3F8h)                                             closed

      Serial Port 1 (CN4) is set to          JP4             pins 2 & 3
      COM3 (3E8h)                                             closed

     Serial Port 2 (CN5) enabled            JP5             pins 1 & 2
                                                              closed

      Serial Port 2 (CN5) disabled           JP5             pins 2 & 3
                                                              closed

     Serial Port 2 (CN5) is set to          JP6             pins 1 & 2
      COM2 (2F8h)                                             closed

      Serial Port 2 (CN5) is set to          JP6             pins 2 & 3
      COM4 (2E8h)                                             closed

     Parallel Port (CN7) enabled            JP7             pins 1 & 2
                                                              closed

      Parallel Port (CN7) disabled           JP7             pins 2 & 3
                                                              closed

     Parallel Port (CN7) is set to          JP8             pins 1 & 2
      LPT2 (378h)                                             closed

      Parallel Port (CN7) is set to          JP8             pins 2 & 3
      LPT3 (278h)                                             closed

