
UNIDENTIFIED

SUPER I/O (0002)

  Data bus:                  16-bit, ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                            CONNECTIONS

                   Function                          Location

  40-pin AT Interface (IDE) connector                  CN1

  34-pin control cable connector-floppy drive          CN2

  10-pin serial port (COM2/4) - internal               CN3

  10-pin serial port (COM1/3) - internal               CN4

  15-pin game port - internal                          CN5

  25-pin parallel port (LPT2/3) - external             CN6

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

     Hard drive enabled                     JP1             pins 2 & 3
                                                              closed

      Hard drive disabled                    JP1             pins 1 & 2
                                                              closed

     Floppy drive enabled                   JP2             pins 2 & 3
                                                              closed

      Floppy drive disabled                  JP2             pins 1 & 2
                                                              closed

     Serial Port 1 (CN4) is set to          JP3             pins 2 & 3
      COM1                                                    closed

      Serial Port 1 (CN4) is set to          JP3             pins 1 & 2
      COM3                                                    closed

     Serial Port 2 (CN3) is set to          JP4             pins 2 & 3
      COM2                                                    closed

      Serial Port 2 (CN3) is set to          JP4             pins 1 & 2
      COM4                                                    closed

     Parallel Port (CN6) is set to          JP5             pins 2 & 3
      LPT2                                                    closed

      Parallel Port (CN6) is set to          JP5             pins 1 & 2
      LPT3                                                    closed

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

     Serial Port 1 (CN4) enabled            JP6             pins 2 & 3
                                                              closed

      Serial Port 1 (CN4) disabled           JP6             pins 1 & 2
                                                              closed

     Serial Port 2 (CN3) enabled            JP7             pins 2 & 3
                                                              closed

      Serial Port 2 (CN3) disabled           JP7             pins 1 & 2
                                                              closed

     Parallel Port (CN6) enabled            JP8             pins 2 & 3
                                                              closed

      Parallel Port (CN6) disabled           JP8             pins 1 & 2
                                                              closed

     Game Port (CN5) enabled                JP9             pins 2 & 3
                                                              closed

      Game Port (CN5) disabled               JP9             pins 1 & 2
                                                              closed

      Serial Port 1 (CN4) uses IRQ9         JP10             pins 2 & 3
                                                              closed

      Serial Port 2 (CN3) uses IRQ9         JP10             pins 1 & 2
                                                              closed

      Serial Port 1 (CN4) uses IRQ3         JP11             pins 2 & 3
                                                              closed

     Serial Port 2 (CN3) uses IRQ3         JP11             pins 1 & 2
                                                              closed

     Serial Port 1 (CN4) uses IRQ4         JP12             pins 2 & 3
                                                              closed

      Serial Port 2 (CN3) uses IRQ4         JP12             pins 1 & 2
                                                              closed

      Serial Port 1 (CN4) uses IRQ5         JP13             pins 2 & 3
                                                              closed

      Serial Port 2 (CN3) uses IRQ5         JP13             pins 1 & 2
                                                              closed

     Parallel Port (CN6) uses IRQ7         JP14             pins 1 & 2
                                                              closed

      Parallel Port (CN6) uses IRQ5         JP14             pins 2 & 3
                                                              closed

     I/O Channel Ready signal              JP15               open
      disabled

      I/O Channel Ready signal              JP15              closed
      enabled

