
TEKRAM TECHNOLOGY CO., LTD.

DC-600T

  Data bus:                16-bit, ISA

  Size:                    Three/quarter-length, full-height card

  Hard drive supported:    Four IDE (AT) Interface drives

  Floppy drives            Two 360KB, 720KB, 1.2MB, or 1.44MB drives
  supported:

[Image]

                              CONNECTIONS

                    Function                           Location

  40-pin IDE (AT) Interface connector - IDE-0             CN1

  40-pin IDE (AT) Interface connector - IDE-1             CN2

  34-pin control cable connector - floppy drive           CN3

  4-pin connector - drive active LED                      JP1

  4-pin connector - cache error speaker                   JP2

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

     IDE-0 damping resistor                JDR0               open
      enabled

      IDE-0 damping resistor                JDR0              closed
      disabled

     IDE-1 damping resistor                JDR1               open
      enabled

      IDE-1 damping resistor                JDR1              closed
      disabled

                               BIOS ADDRESS

      Address          JP3/jumper 1      JP3/jumper 2      JP3/jumper 3

        DC000h           closed            closed            closed

         DC000h           closed            closed             open

         D8000h           closed             open             closed

         D4000h           closed             open              open

         D0000h            open             closed            closed

         CC000h            open             closed             open

         C8000h            open              open             closed

        Disabled           open              open              open

                        USER CONFIGURABLE SETTINGS

              Function                    Location            Setting

     Floppy drive enabled              JP3/jumper 4          closed

      Floppy drive disabled             JP3/jumper 4           open

     Hard drive port address is        JP3/jumper 5          closed
      1F0-1F7h

      Hard drive port address is        JP3/jumper 5           open
      170-177h

                       MISCELLANEOUS TECHNICAL NOTES

   At least one SIMM memory module (256KB, 1MB, or 4MB) must be installed
   in order for the controller to function. Different sizes can be mixed
                            in any combination.

