
PROMISE TECHNOLOGY, INC.

DC4030VL

  Data bus:                32-bit, VL-bus

  Size:                    Three/quarter-length, full-height card

  Hard drive supported:    Four IDE (AT) Interface drives

  Floppy drives            Four 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB
  supported:               drives

[Image]

                                CONNECTIONS

                     Function                             Location

  34-pin control cable connector - floppy drive              J1
  BUS-0

  34-pin control cable connector - floppy drive              J2
  BUS-1

  40-pin IDE (AT) Interface connector IDE-0                  J3

  40-pin IDE (AT) Interface connector IDE-1                  J4

  4-pin connector - drive active LED                        JP1

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Floppy drive enabled                   JP2              Closed

      Floppy drive disabled                  JP2               Open

     VL-bus ID3 signal support              JP4              Closed
      enabled*

      VL-bus ID3 signal support              JP4               Open
      disabled*

  *Note: Open JP4 if your motherboard is 50MHz 486 and does not support
  ID3 signal.

                       MISCELLANEOUS TECHNICAL NOTES

    At least one pair SIMM of memory modules (256KB, 1MB, or 4MB) of the
    same size must be installed in Bank 0 in order for the controller to
                                 function.

