
PINE TECHNOLOGY

PT-626

  Data bus:                 32-bit, VL-Bus

  Size:                     Three quarter-length, full-height card

  Hard drive supported:     Two IDE (AT) interface drives

  Floppy drives             360KB, 720KB, 1.2MB, 1.44MB
  supported:

[Image]

                               CONNECTIONS

                    Function                             Location

  40-pin IDE (AT) interface connector                      CN1

  34-pin control cable connector - floppy drive            CN2

  15-pin game port - internal                              CN3

  9-pin serial port 1 (COM1/3)                             CN4

  9-pin serial port 2 (COM2/4)                             CN5

  25-pin parallel port                                     CN6

  External IDE (AT) interface LED connector                JP6

                        USER CONFIGURABLE SETTINGS

              Function                    Location           Setting

     IDE interface enabled                 JP7         pins 1 & 2 closed

      IDE interface disabled                JP7         pins 2 & 3 closed

     Parallel port enabled                 JP11        pins 1 & 2 closed

      Parallel port disabled                JP11        pins 2 & 3 closed

     Hard drive is installed in            JP12        pins 2 & 3 closed
      system

      Hard drive is not installed           JP12        pins 1 & 2 closed
      in system

                   USER CONFIGURABLE SETTINGS(CONTINUED)

              Function                    Location           Setting

     Serial port 1 enabled                 JP13        pins 1 & 2 closed

      Serial port 1 disabled                JP13        pins 2 & 3 closed

     Serial port 1 address 3F8h            JP14        pins 1 & 2 closed
      select

      Serial port 1 address 3E8h            JP14        pins 2 & 3 closed
      select

     Serial port 2 enabled                 JP15        pins 1 & 2 closed

      Serial port 2 disabled                JP15        pins 2 & 3 closed

     Floppy drive interface                JP16        pins 1 & 2 closed
      enabled

      Floppy drive interface                JP16        pins 2 & 3 closed
      disabled

     Parallel port address 378h            JP17        pins 1 & 2 closed
      select

      Parallel port address 278h            JP17        pins 2 & 3 closed
      select

     Serial port 2 address 2F8h            JP18        pins 1 & 2 closed
      select

      Serial port 2 address 2E8h            JP18        pins 2 & 3 closed
      select

     Game port enabled                     JP19        pins 1 & 2 closed

      Game port disabled                    JP19        pins 2 & 3 closed

                  ACTIVE/RECOVERY TIMES FOR 33MHZ SYSTEMS

  Active    Recov.     JP3      JP4      JP5      JP8      JP9      JP10

    5T        5T      pins 2   pins 1   pins 2   pins 2   pins 2   pins 2
                       & 3      & 2      & 3      & 3      & 3      & 3

    5T        7T      pins 2   pins 1   pins 2   pins 1   pins 2   pins 2
                       & 3      & 2      & 3      & 2      & 3      & 3

    5T        9T      pins 2   pins 1   pins 2   pins 2   pins 1   pins 2
                       & 3      & 2      & 3      & 3      & 2      & 3

  Note: All pins designated should be placed in the closed position.

                  ACTIVE/RECOVERY TIMES FOR 50MHZ SYSTEMS

  Active    Recov.     JP3      JP4      JP5      JP8      JP9      JP10

    9T        9T      pins 2   pins 1   pins 1   pins 2   pins 1   pins 2
                       & 3      & 2      & 2      & 3      & 2      & 3

    9T        11T     pins 2   pins 1   pins 1   pins 1   pins 1   pins 2
                       & 3      & 2      & 2      & 2      & 2      & 3

    9T        13T     pins 2   pins 1   pins 1   pins 2   pins 2   pins 1
                       & 3      & 2      & 2      & 3      & 3      & 2

  Note: All pins designated should be placed in the closed position.

