
UNIDENTIFIED

IDE/FDC/MULTI -I/O

  Data bus:                  16-bit ISA

  Size:                      Three-quarter length, full-height card

  Hard drive supported:      Two IDE(AT) interface drives

  Floppy drives supported:   360KB, 720KB, 1.2MB, 1.44MB

[Image]

                               CONNECTIONS

                    Function                             Location

  15-pin connector - game port                             CN1

  40-pin control cable connector - hard drive              CN2

  34-pin control cable connector - floppy drive            CN3

  9-pin serial port 2 - internal                           CN4

  9-pin serial port 1 - external                           CN5

  25-pin parallel port - external                          CN6

  4-pin connector - drive active LED                       JP1

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Serial port 1 enabled                   JP2            pins 1 & 2
                                                              closed

      Serial port 1 disabled                  JP2            pins 2 & 3
                                                              closed

     Game port enabled                       JP3            pins 1 & 2
                                                              closed

      Game port disabled                      JP3            pins 2 & 3
                                                              closed

                   USER CONFIGURABLE SETTINGS(CONTINUED)

               Function                    Location           Setting

     Floppy drive interface primary          JP4            pins 1 & 2
      address select                                           closed

      Floppy drive interface                  JP4            pins 2 & 3
      alternate address select                                 closed

     Parallel port primary address           JP5            pins 1 & 2
      select                                                   closed

      Parallel port alternate                 JP5            pins 2 & 3
      address select                                           closed

     IDE interface enabled                   JP6            pins 1 & 2
                                                               closed

      IDE interface disabled                  JP6            pins 2 & 3
                                                               closed

     Serial port 2 enabled                   JP7            pins 1 & 2
                                                               closed

      Serial port 2 disabled                  JP7            pins 2 & 3
                                                               closed

     Serial ports 1 & 2 primary              JP8            pins 1 & 2
      address select                                           closed

      Serial ports 1 & 2 alternate            JP8            pins 2 & 3
      address select                                           closed

