
UNIDENTIFIED

CCAT100A/200A

  Data bus:                  16-bit ISA

  Size:                      Three-quarter length, half-height card

  Hard drive supported:      Two IDE(AT) interface drives

  Floppy drives supported:   360KB, 720KB, 1.2MB, 1.44MB

[Image]

                               CONNECTIONS

                    Function                             Location

  4-pin connector - drive active LED                        J1

  40-pin IDE(AT) interface connector                        J2

  34-pin control cable connector - floppy drive             J3

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Unbuffered IRQ14 enabled                W1             pins 3 & 4
                                                               closed

      Buffered IRQ14 enabled                  W1             pins 1 & 2
                                                               closed

     Floppy drive interface enabled          W2             pins 1 & 2
                                                               closed

      Floppy drive interface                  W2             pins 1 & 2
      disabled                                                  open

     Floppy drive interface is               W2             pins 3 & 4
      primary adapter                                           open

      Floppy drive interface is               W2             pins 3 & 4
      secondary adapter                                        closed

     Single speed floppy drive               W3                open
      interface enabled

      Dual speed floppy drive                 W3               closed
      interface enabled

