
DATA TECHNOLOGY CORPORATION

DTC 2130 (900148-89B)

Data bus:                32-bit PCI
Size:                    Full-length, full-height card
Hard drive supported:    Two IDE(AT) Interface drives
Floppy drives supported: None

[Image]

                           CONNECTIONS

                   Function                         Location

  10-pin connector - header cable connection           J1

  40-pin connector - IDE interface                     J2

  Drive activity LED                                  LED

                        USER CONFIGURABLE SETTINGS

              Function                    Location           Setting

  PCI INTA redirected to IRQ14               W1               closed

  PCI INTA not able to be                    W1                open
  redirected to IRQ14

                       MISCELLANEOUS TECHNICAL NOTE

  Note:If your motherboard has an on-board IDE controller, it will have
  to be disabled. The DTC 2130S

  needs access to IRQ14 in order to operate properly in the PCI slot.
  Some motherboards allow you redirect PCI INTA to IRQ14. If the PCI
  motherboard wont allow you to redirect PCI interrrupts, then you will
  need to use the DTC 1415 Interrupt adapter. The DTC 1415 installs into
  any ISA B slot and has a header (W1) compatible with the DTC 2130S J1
  header. The ISA A slot may still be used by an 8-bit card.

