
PINE TECHNOLOGY

PT-627

  Data bus:                32-bit, VL-bus

  Size:                    Three/quarter-length, half-height card

  Hard drive supported:    Four IDE (AT) interface drives

  Floppy drives            Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB
  supported:               drives

[Image]

                                CONNECTIONS

                     Function                             Location

  40-pin IDE (AT) interface connector - port 1               CN1

  40-pin IDE (AT) interface connector - port 2               CN2

  34-pin control cable connector - floppy drive              CN3

  Game port                                                  CN4

  Serial port 1 - external                                   CN5

  Serial port 2 - internal                                   CN6

  Parallel port                                              CN7

  2-pin connector - primary drive port active LED            CN8

  2-pin connector - secondary drive port active              CN9
  LED

                        USER CONFIGURABLE SETTINGS

                Function                    Location          Setting

      IOCHRDY enabled                          J1              Closed

      IOCHRDY disabled                         J1               Open

     Primary IDE port enabled                 JP5           Pins 1 & 2
                                                               closed

      Primary IDE port disabled                JP5           Pins 2 & 3
                                                               closed

     Secondary IDE port disabled              JP6           Pins 2 & 3
                                                               closed

      Secondary IDE port enabled               JP6           Pins 1 & 2
                                                               closed

     Floppy drive enabled                     JP7           Pins 1 & 2
                                                               closed

      Floppy drive disabled                    JP7           Pins 2 & 3
                                                               closed

     Game port enabled                        JP8           Pins 1 & 2
                                                               closed

      Game port disabled                       JP8           Pins 2 & 3
                                                               closed

      ECP enabled                             JP16           Pins 1 & 2
                                                               closed

      ECP disabled                            JP16           Pins 2 & 3
                                                               closed

                        USER CONFIGURABLE SETTINGS

                Function                     Location         Setting

  CN8 and CN9 enabled for both primary         JP18           Closed
  and secondary IDE ports

  CN8 used for primary IDE port/CN9 used       JP18            Open
  for secondary IDE port

                        PARALLEL PORT CONFIGURATION

             LPT                       JP9                   JP11

              LPT2             Pins 1 & 2 closed      Pins 1 & 2 closed

               LPT3             Pins 2 & 3 closed      Pins 1 & 2 closed

             Disabled                  N/A             Pins 2 & 3 closed

                   ENHANCED PARALLEL PORT CONFIGURATION

           Setting                     JP10                  JP11

      Standard parallel port   Pins 1 & 2 closed      Pins 2 & 3 closed
              enabled

            EPP enabled         Pins 2 & 3 closed      Pins 1 & 2 closed

            ECP enabled         Pins 1 & 2 closed      Pins 1 & 2 closed

                        SERIAL PORT 1 CONFIGURATION

         COM/Address                   JP12                  JP13

            COM1/3F8h          Pins 1 & 2 closed      Pins 1 & 2 closed

             COM3/3E8h           Pins 1& 2 closed      Pins 1 & 2 closed

             Disabled           Pins 2 & 3 closed             N/A

                        SERIAL PORT 2 CONFIGURATION

             COM                       JP14                  JP15

            COM2/2F8h          Pins 1 & 2 closed      Pins 1 & 2 closed

             COM4/2E8h          Pins 2 & 3 closed      Pins 1 & 2 closed

             Disabled                  N/A             Pins 2 & 3 closed

               SERIAL PORTS 1 & 2 INTERRUPT SELECT

          IRQ                  JP20                 JP21

         IRQ3            Pins 2 & 3 closed          N/A

         IRQ4                   N/A           Pins 2 & 3 closed

         IRQ5            Pins 1 & 2 closed          N/A

         IRQ9                   N/A           Pins 1 & 2 closed

                            HARD DRIVE SPEED

         Setting                    ID0                     ID1

   Speed 0 (HDD < 40MB)      Pins 2 & 3 closed       Pins 2 & 3 closed

  Speed 1 (40/50Mhz CPU)     Pins 1 & 2 closed       Pins 1 & 2 closed

  Speed 2 (25/33Mhz CPU)     Pins 1 & 2 closed       Pins 2 & 3 closed

   Speed 3 (<20Mhz CPU)      Pins 2 & 3 closed       Pins 1 & 2 closed

                 DRQ SELECT - S1

     DRQ      Jumper A     Jumper B    Jumper C

    DRQ1       Closed        Open       Open

    DRQ3        Open        Closed      Open

  Disabled      Open         Open      Closed

                DACK SELECT - S2

    DACK      Jumper A     Jumper B    Jumper C

    DACK1      Closed        Open       Open

    DACK3       Open        Closed      Open

  Disabled      Open         Open      Closed

