
SIIG, INC.

SI-1132+

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB
                             drives

[Image]

                              CONNECTIONS

                    Function                           Location

  2-pin connector - drive active LED                      JP1

  34-pin control cable connector - floppy drive           JP2

  40-pin IDE(AT) Interface connector                      JP3

  10-pin serial port 2 - internal                         JP5

  16-pin game port - internal                             JP6

  9-pin serial port - external                            JP7

  25-pin parallel port - external                         JP8

                        USER CONFIGURABLE SETTINGS

                Function                    Location         Setting

     Parallel port uni-directional           JP10/A           closed

     Parallel port bi-directional            JP10/A            open

     Game port enabled                       JP10/B           closed

     Game port disabled                      JP10/B            open

     Floppy controller enabled            JP11/A pins 1       closed
                                               & 2

     Floppy controller disabled           JP11/A pins 2       closed
                                               & 3

     IDE (AT) interface enabled           JP11/B pins 1       closed
                                               & 2

     IDE (AT) interface disabled          JP11/B pins 2       closed
                                               & 3

     Floppy drive order A:, B: normal     JP11/C pins 1       closed
                                               & 2

     Floppy drive order A:, B:            JP11/C pins 2       closed
      exchange                                 & 3

     Serial port 1 IRQ4 select            JP11/D pins 1       closed
                                               & 2

     Serial port 1 IRQ3 select            JP11/D pins 2       closed
                                               & 3

     Serial port 2 IRQ3 select            JP11/E pins 1       closed
                                               & 2

     Serial port 2 IRQ4 select            JP11/E pins 2       closed
                                               & 3

     Parallel port IRQ7 select            JP11/F pins 2       closed
                                               & 3

     Parallel port IRQ5 select            JP11/F pins 1       closed
                                               & 2

                        SERIAL PORT 1 CONFIGURATION

             COM                    JP12/A                 JP12/B

          COM1 (3F8h)         pins 1 & 2 closed      pins 1 & 2 closed

          COM3 (3E8h)         pins 2 & 3 closed      pins 2 & 3 closed

           Disabled           pins 2 & 3 closed      pins 1 & 2 closed

                        SERIAL PORT 2 CONFIGURATION

             COM                    JP12/C                 JP12/D

          COM2 (2F8h)         pins 1 & 2 closed      pins 1 & 2 closed

          COM4 (2E8h)         pins 2 & 3 closed      pins 2 & 3 closed

           Disabled           pins 2 & 3 closed      pins 1 & 2 closed

                        PARALLEL PORT CONFIGURATION

             LPT                    JP12/E                 JP12/F

          LPT2 (378h)         pins 1 & 2 closed      pins 1 & 2 closed

          LPT1 (3BCh)         pins 2 & 3 closed      pins 1 & 2 closed

          LPT3 (278h)         pins 2 & 3 closed      pins 2 & 3 closed

           Disabled           pins 1 & 2 closed      pins 2 & 3 closed

