
RELIALOGIC CORPORATION PRIVATE, LTD.

CA8972F

  Data bus:                 32-bit, VL-Bus

  Size:                     Three quarter-length, half-height card

  Hard drive supported:     Two IDE (AT) interface drives

  Floppy drives             360KB, 720KB, 1.2MB, or 1.44MB drives
  supported:

[Image]

                               CONNECTIONS

                    Function                             Location

  40-pin primary IDE(AT) interface                         CN1

  40-pin secondary IDE(AT) interface                       CN2

  34-pin control cable connector - floppy drive            CN3

  16-pin Game port                                         CN4

  10-pin serial port 1 - internal                          CN5

  10-pin serial port 2 - internal                          CN6

  25-pin parallel port                                     CN7

  9-pin serial port 1 - external                           CN8

  2-pin drive active LED for primary IDE                   JP1

  2-pin drive active LED for secondary IDE                 JP2

                   HDD SPEED CONFIGURATION

        Speed                JP3                  JP4

          0            pins 2 & 3 closed   pins 2 & 3 closed

          1            pins 1 & 2 closed   pins 1 & 2 closed

          2            pins 2 & 3 closed   pins 1 & 2 closed

          3            pins 1 & 2 closed   pins 2 & 3 closed

  Note: Speed "0" is the lowest, speed "3" is the highest.

                        USER CONFIGURABLE SETTINGS

               Function                   Location           Setting

     Primary IDE interface enabled         JP5         pins 1 & 2 closed

      Primary IDE interface disabled        JP5         pins 2 & 3 closed

     Secondary IDE interface               JP6         pins 1 & 2 closed
      enabled

      Secondary IDE interface               JP6         pins 2 & 3 closed
      disabled

     Floppy drive interface enabled        JP9         pins 1 & 2 closed

      Floppy drive interface                JP9         pins 2 & 3 closed
      disabled

     Parallel port is LPT2                 JP14        pins 1 & 2 closed

      Parallel port is LPT3                 JP14        pins 2 & 3 closed

     Game port enabled                     JP15        pins 1 & 2 closed

      Game port disabled                    JP15        pins 2 & 3 closed

     External floppy drive                 JP16        Pins 1 & 2 closed
      controller enabled

      External floppy drive                 JP16        pins 2 & 3 closed
      controller disabled

       Note: When enabling the external floppy drive controller, an
       external floppy drive can be attached to the parallel port.

                     PARALLEL PORT MODE CONFIGURATION

            MODE                      JP7                    JP8

       Standard printer       pins 1 & 2 closed      pins 2 & 3 closed

               ECP             pins 1 & 2 closed      pins 1 & 2 closed

               EPP             pins 2 & 3 closed      pins 1 & 2 closed

            Disabled           pins 2 & 3 closed      pins 2 & 3 closed

                        SERIAL PORT 1 CONFIGURATION

             COM                      JP10                   JP11

             COM1             pins 1 & 2 closed      pins 1 & 2 closed

              COM3             pins 2 & 3 closed      pins 1 & 2 closed

            Disabled                  N/A             pins 2 & 3 closed

                        SERIAL PORT 2 CONFIGURATION

             COM                      JP12                   JP13

             COM2             pins 1 & 2 closed      pins 1 & 2 closed

              COM4             pins 2 & 3 closed      pins 1 & 2 closed

            Disabled                  N/A             pins 2 & 3 closed

                               DMA SELECTION

           DMA                      JP17                    JP18

            DMA1            pins 1 & 2 closed        pins 1 & 2 closed

             DMA3            pins 2 & 3 closed        pins 2 & 3 closed

