
UNIDENTIFIED

TD1010

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE(AT) or one IDE(XT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                            CONNECTIONS

                   Function                          Location

  Game port                                            CN1

  40-pin IDE(AT) Interface connector                   CN2

  34-pin control cable connector-floppy drive          CN3

  10-pin serial port (COM2/4) - internal               CN4

  10-pin serial port (COM1/3) - external               CN5

  25-pin parallel port (LPT1/2) - external             CN6

  2-pin connector - Drive active LED                   JP1

t

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Serial port 1 enabled                  JP2             pins 1 & 2
                                                              closed

      Serial port 1 disabled                 JP2             pins 2 & 3
                                                              closed

     Game port enabled                      JP3             pins 1 & 2
                                                              closed

      Game port disabled                     JP3             pins 2 & 3
                                                              closed

     Floppy drive enabled                   JP4             pins 1 & 2
                                                              closed

      Floppy drive disabled                  JP4             pins 2 & 3
                                                              closed

     Parallel port address = 378h           JP5             pins 1 & 2
                                                              closed

      Parallel port address = 278h           JP5             pins 2 & 3
                                                              closed

     IDE interface enabled                  JP6             pins 1 & 2
                                                              closed

      IDE interface disabled                 JP6             pins 2 & 3
                                                              closed

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Serial port 2 enabled                  JP7             pins 1 & 2
                                                              closed

      Serial port 2 disabled                 JP7             pins 2 & 3
                                                              closed

     Hard drive installed                   JP8             pins 2 & 3
                                                              closed

      Hard drive not installed               JP8             pins 1 & 2
                                                              closed

