
UNIDENTIFIED

KT-IDE PLUS-V1(VER. 2)

  Data bus:                  16-bit, ISA

  Size:                      Half-length, full-height card

  Hard drive supported:      Two IDE(AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                     Function                            Location

  10-pin serial port 1 - internal                          CN1

  10-pin serial port 2 - internal                          CN2

  34-pin control cable connection - floppy drive           CN3

  40-pin IDE(AT) Interface connector                       CN4

  Game port                                                CN5

  Parallel port                                            CN6

  2-pin connector - drive active LED                       CN7

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Game port enabled                       JP2             closed

      Game port disabled                      JP2              open

     Factory configured - do not             JP6            pins 1 & 2
      alter                                                   closed

     Parallel port IRQ7 selected             JP7            pins 2 & 3
                                                              closed

      Parallel port IRQ5 selected             JP7            pins 1 & 2
                                                              closed

                        PARALLEL PORT CONFIGURATION

               LPT/Address                              JP3

                 LPT1/378h                      pins 2 & 3 closed

                  LPT2/278h                      pins 1 & 2 closed

                  Disabled                         all pins open

                        SERIAL PORT 1 CONFIGURATION

               COM/Address                              JP5

                 COM1/3F8h                      pins 2 & 3 closed

                  COM3/3E8h                      pins 1 & 2 closed

                  Disabled                         all pins open

                        SERIAL PORT 2 CONFIGURATION

               COM/Address                              JP4

                 COM2/2F8h                      pins 2 & 3 closed

                  COM4/2E8h                      pins 1 & 2 closed

                  Disabled                         all pins open

