
UNIDENTIFIED

IODE-3292PUV

  Data bus:                  32-bit, VL-bus

  Size:                      Half-length, half-height card

  Hard drive supported:      Two IDE (AT) Interface drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  40-pin IDE(AT) Interface connector                      CN1

  34-pin control cable connector - floppy drive           CN2

  Game port                                               CN3

  10-pin serial port 2 - internal                         CN4

  9-pin serial port 1 - external                          CN5

  25-pin parallel port                                    CN6

  2-pin connector - drive active LED                     JP18

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Floppy drive enabled                    JP2            pins 1 & 2
                                                               closed

      Floppy drive disabled                   JP2            pins 2 & 3
                                                               closed

     Game Port enabled                       JP6            pins 1 & 2
                                                               closed

      Game Port disabled                      JP6            pins 2 & 3
                                                               closed

     Serial port 1 interrupt = IRQ4         JP16            pins 1 & 2
                                                               closed

      Serial port 1 interrupt = IRQ3         JP16            pins 2 & 3
                                                               closed

     Serial Port 2 interrupt = IRQ3         JP17            pins 1 & 2
                                                               closed

      Serial Port 2 interrupt = IRQ4         JP17            pins 2 & 3
                                                               closed

      Local bus device synchronous         JP23/A-C           jumper A
      mode selected                                            closed

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

      Local bus device asynchronous        JP23/A-C           jumper B
      mode 1 selected                                         closed

      Local bus device asynchronous        JP23/A-C           jumper C
      mode 2 selected                                         closed

      ADS synchronous mode selected          JP24            pins 1 & 2
                                                              closed

      ADS asynchronous mode selected         JP24            pins 2 & 3
                                                              closed

      Local bus clock synchronous            JP25            pins 1 & 2
      mode selected                                           closed

      Local bus clock asynchronous           JP25            pins 2 & 3
      mode selected                                           closed

     Factory configured - do not            JP26             closed
      alter

                        PARALLEL PORT CONFIGURATION

         LPT/Address                   JP3                   JP9

           LPT1/378h           pins 1 & 2 closed     pins 1 & 2 closed

            LPT2/278h           pins 1 & 2 closed     pins 2 & 3 closed

             Disabled           pins 2 & 3 closed            n/a

                        SERIAL PORT 1 CONFIGURATION

         COM/Address                   JP4                   JP10

           COM1/3F8h           pins 1 & 2 closed     pins 1 & 2 closed

            COM3/3E8h           pins 1 & 2 closed     pins 2 & 3 closed

             Disabled           pins 2 & 3 closed            n/a

                        SERIAL PORT 2 CONFIGURATION

         COM/Address                   JP5                   JP11

           COM2/2F8h           pins 1 & 2 closed     pins 1 & 2 closed

            COM4/2E8h           pins 1 & 2 closed     pins 2 & 3 closed

             Disabled           pins 2 & 3 closed            n/a

                             HARD DRIVE SPEED

           Setting                    JP19                   JP20

            Speed 0           pins 1 & 2 closed      pins 1 & 2 closed

             Speed 1           pins 2 & 3 closed      pins 1 & 2 closed

             Speed 2           pins 2 & 3 closed      pins 2 & 3 closed

