
UNIDENTIFIED

SP-160

  Data bus:                   16-bit, ISA

  Size:                       Half-length, full-height card

  Hard drive supported:       Two IDE (AT) Interface drives and up to
                              seven SCSI devices

  Floppy drives supported:    Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                              CONNECTIONS

                    Function                           Location

  Game port                                               CN1

  25-pin parallel port                                    CN2

  10-pin serial port 1                                    CN3

  10-pin serial port 2                                    CN4

  40-pin IDE (AT) interface connector                     CN5

  34-pin control cable connector - floppy drive           CN6

  50-pin SCSI connector - internal                        CN7

  50-pin SCSI connector - external                        CN8

  4-pin connector - drive active LED (IDE)                CN9

  4-pin connector - drive active LED (SCSI)              CN10

                        USER CONFIGURABLE SETTINGS

               Function                     Location          Setting

     Floppy drive enabled                    JP1            pins 1 & 2
                                                               closed

      Floppy drive disabled                   JP1            pins 3 & 4
                                                               closed

     Factory configured - do not             JP4               n/a
      alter

     AHA-1520 driver compatibility       JP7/jumper A          open
      enabled

      6360 compatibility enabled          JP7/jumper A         closed

     Factory configured - do not         JP7/jumper B          n/a
      alter

                        USER CONFIGURABLE SETTINGS

                Function                     Location          Setting

     Disconnect/reselect enabled          JP7/jumper C        closed

      Disconnect/reselect disabled         JP7/jumper C         open

     Synchronous negotiation enabled      JP7/jumper D        closed

      Synchronous negotiation disabled     JP7/jumper D         open

     Boot-up with INT19 enabled           JP7/jumper E        closed

      Boot-up with INT19 disabled          JP7/jumper E         open

     Factory configured - do not          JP7/jumper F          n/a
      alter

     Factory configured - do not          JP7/jumper G          n/a
      alter

     Factory configured - do not          JP7/jumper H          n/a
      alter

     SCSI parity enabled                  JP9/jumper D         open

      SCSI parity disabled                 JP9/jumper D        closed

     SCSI address = 340h                      JP10             open

      SCSI address = 140h                      JP10            closed

     Factory configured - do not               W1               n/a
      alter

     Factory configured - do not               W2               n/a
      alter

     Factory configured - do not               W3               n/a
      alter

                          IDE PORT CONFIGURATION

           Address                     JP2                   JP3

            Primary            pins 1 & 2 closed     pins 1 & 2 closed

            Secondary           pins 1 & 2 closed     pins 2 & 3 closed

             Disabled           pins 2 & 3 closed       all pins open

                                     SCSI INTERRUPT SELECT

   IRQ    JP6/A    JP6/B    JP6/C    JP6/D      RN19         RN20         RN21         RN22

     11   open     open    closed    open       not       installed       not          not
                                              installed                 installed    installed

      9   closed    open     open     open       not          not          not       installed
                                              installed    installed    installed

      10   open    closed    open     open       not          not       installed       not
                                              installed    installed                 installed

      12   open     open     open    closed   installed       not          not          not
                                                           installed    installed    installed

  Note:RN19-RN22 are four-pin resistors.

                            BIOS ADDRESS - JP8

        Address             Jumper A        Jumper B          Jumper C

          D8000h            closed          closed            closed

           C8000h             open           closed            closed

           CC000h            closed           open              open

           D0000h            closed           open             closed

           D4000h            closed          closed             open

          Disabled            open            open             closed

                               SCSI ID - JP9

        ID#              Jumper A          Jumper B          Jumper C

          ID7            closed            closed            closed

           ID0             open              open              open

           ID1            closed             open              open

           ID2             open             closed             open

           ID3            closed            closed             open

           ID4             open              open             closed

           ID5            closed             open             closed

           ID6             open             closed            closed

                                              SCSI ID

    IRQ      JP6/A    JP6/B    JP6/C    JP6/D      RN19         RN20         RN21         RN22

     IRQ11   open     open    closed    open       not       installed       not          not
                                                 installed                 installed    installed

      IRQ9   closed    open     open     open       not          not          not       installed
                                                 installed    installed    installed

      IRQ10   open    closed    open     open       not          not       installed       not
                                                 installed    installed                 installed

      IRQ12   open     open     open    closed   installed       not          not          not
                                                              installed    installed    installed

                        PARALLEL PORT CONFIGURATION

     LPT/Address            RN2               RN3               RN4

       LPT2/378h        installed       not installed     not installed

        LPT3/278h      not installed       installed       not installed

        Disabled       not installed     not installed       installed

  Note:RN2-RN4 are four-pin resistors.

                        SERIAL PORT 1 CONFIGURATION

     COM/Address            RN8               RN9              RN10

       COM1/3F8h        installed       not installed     not installed

        COM3/3E8h      not installed       installed       not installed

        Disabled       not installed     not installed       installed

  Note:RN8-RN10 are four-pin resistors.

                        SERIAL PORT 2 CONFIGURATION

     COM/Address            RN5               RN6               RN7

       COM2/2F8h        installed       not installed     not installed

        COM4/2E8h      not installed       installed       not installed

        Disabled       not installed     not installed       installed

  Note:RN5-RN7 are four-pin resistors.

