
SINACOM

SUPER I/O CARD

 Data bus:                  16-bit ISA

 Size:                      Half-length, full-height card

 Hard drive supported:      Two IDE(AT) drives

 Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                         CONNECTIONS

                 Function                       Location

  40-pin IDE(AT) connector                         CN1

  34-pin cable connector - floppy drive            CN2

  16-pin game port                                 CN3

  10-pin serial port 2 - internal                  CN4

  9-pin serial port 1 - external                   CN5

  25-pin parallel port - external                  CN6

  Drive active LED (size is unidentified)          CN7

                        USER CONFIGURABLE SETTINGS

              Function
                                          Location
                                                              Setting

  
      Serial port 1 is COM1 (3F8h)
                                       JP1/pins 1 & 2
                                                              closed


      Serial port 1 is COM3 (3E8h)
                                       JP1/pins 2 & 3
                                                              closed

  
      Serial port 2 is COM2 (2F8h)
                                       JP2/pins 1 & 2
                                                              closed


      Serial port 2 is COM4 (2E8h)
                                       JP2/pins 2 & 3
                                                              closed

  
      Floppy drive interface
      enabled
                                       JP3/pins 1 & 2
                                                              closed


      Floppy drive interface
      disabled
                                       JP3/pins 2 & 3
                                                              closed

  
      Game port enabled
                                       JP4/pins 1 & 2
                                                              closed


      Game port disabled
                                       JP4/pins 2 & 3
                                                              closed

  
      Parallel port is LPT1 (378h)
                                       JP5/pins 1 & 2
                                                              closed


      Parallel port is LPT2 (278h)
                                       JP5/pins 2 & 3
                                                              closed

  
      Parallel port IRQ 7 select
                                       JP6/pins 1 & 2
                                                              closed


      Parallel port IRQ 5 select
                                       JP6/pins 2 & 3
                                                              closed

          MISCELLANEOUS TECHNICAL NOTES

  Pin 1 in the JP jumper block is unidentified.

