
SIIG, INC.

DUAL IDE CONTROLLER VL

  Data bus:                  32-bit VL-bus

  Size:                      Three-quarter length, half-height card

  Hard drive supported:      Two IDE(AT) & two EIDE drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                                CONNECTIONS

                    Function                             Location

  40-pin VL/EIDE connector                                  J1

  40-pin ISA/IDE connector                                  J2

  34-pin cable connector - floppy drive                     J3

  16-pin game port                                          J4

  10-pin serial port 2 - internal                           J5

  9-pin serial port 1 - external, 10-pin                    J6
  serial port 1 - internal

  25-pin Parallel port - external                           J7

  4-pin connector - drive active LED                       JP1

                        USER CONFIGURABLE SETTINGS

               Function                    Location           Setting

     Floppy drive interface enabled        JP5/8            pins 1 & 2
                                                              closed

      Floppy drive interface                JP5/8            pins 2 & 3
      disabled                                                closed

     Parallel port is                      JP5/9            pins 1 & 2
      unidirectional                                          closed

      Parallel port is                      JP5/9            pins 2 & 3
      bi-directional                                          closed

                        HARD DRIVE SPEED SELECTION

          Speed                    JP3/1                   JP3/2

             0              pins 1 & 2 closed       pins 1 & 2 closed

              2              pins 2 & 3 closed       pins 1 & 2 closed

              4              pins 1 & 2 closed       pins 2 & 3 closed

              6              pins 2 & 3 closed       pins 2 & 3 closed

                         VL/ISA IDE CONFIGURATION

      VL/IDE             ISA/IDE            JP2/1             JP2/2

     Disabled            Enabled          pins 1 & 2        pins 2 & 3
                                           closed             closed

      Enabled           Disabled          pins 2 & 3        pins 1 & 2
                                           closed             closed

      Enabled            Enabled          pins 1 & 2        pins 1 & 2
                                           closed             closed

     Disabled           Disabled          pins 2 & 3        pins 2 & 3
                                           closed             closed

                         PRIMARY IDE CONFIGURATION

  Primary IDE        JP4/1         JP4/2         JP4/3          JP4/4

        VL         closed        closed         closed         closed

         ISA         open          open           open           open

                PARALLEL PORT ADDRESS & INTERRUPT SELECTION

    Address/Interrupt          JP5/5           JP5/6            JP5/7

          378h/IRQ7         pins 1 & 2      pins 1 & 2       pins 1 & 2
                               closed          closed          closed

           378h/IRQ5         pins 1 & 2      pins 1 & 2       pins 2 & 3
                               closed          closed          closed

           278h/IRQ5         pins 1 & 2      pins 2 & 3       pins 2 & 3
                               closed          closed          closed

           278h/IRQ7         pins 2 & 3      pins 2 & 3       pins 1 & 2
                               closed          closed          closed

           3BCh/IRQ5         pins 2 & 3      pins 2 & 3       pins 2 & 3
                               closed          closed          closed

           3BCh/IRQ7         pins 1 & 2      pins 2 & 3       pins 1 & 2
                               closed          closed          closed

           Disabled          pins 2 & 3      pins 1 & 2     pins 1, 2 & 3
                               closed          closed           open

                      SERIAL PORT 1 ADDRESS SELECTION

             COM                      JP5/1                  JP5/2

          COM1 (3F8h)          pins 1 & 2 closed      pins 1 & 2 closed

           COM3 (3E8h)          pins 2 & 3 closed      pins 2 & 3 closed

           COM4 (2E8h)          pins 1 & 2 closed      pins 2 & 3 closed

             Disabled           pins 2 & 3 closed      pins 1 & 2 closed

                      SERIAL PORT 2 ADDRESS SELECTION

             COM                      JP5/3                  JP5/4

          COM2 (2F8h)          pins 1 & 2 closed      pins 1 & 2 closed

           COM3 (3E8h)          pins 1 & 2 closed      pins 2 & 3 closed

           COM4 (2E8h)          pins 2 & 3 closed      pins 2 & 3 closed

             Disabled           pins 2 & 3 closed      pins 1 & 2 closed

