
BUSLOGIC, INC.

BT-410CD

 Data bus:                  32-bit VESA local bus

 Size:                      Three quarter-length, full-height card

 Hard drive supported:      Four IDE (AT) interface drives, Two ATAPI
                            devices

 Floppy drives supported:   Two 360KB, 720KB, 1.2MB, 1.44MB drives

[Image]

                           CONNECTIONS

                  Function                        Location

  40-pin connector - IDE (AT) interface 1            CN1

  40-pin connector - IDE (AT) interface 2            CN2

  34-pin connector - Floppy drive interface          CN3

  40-pin connector - ATAPI interface                 CN4

  4-pin connector - Drive active LED                 JP1

  4-pin connector - Speaker                          JP2

                        USER CONFIGURABLE SETTINGS

              Function
                                          Location
                                                              Setting

  
      ATAPI mode enabled
                                            JP3
                                                              closed


      ATAPI mode disabled
                                            JP3
                                                               open

       Note: If you are using two BT-410CD units in the same system, both
       cards must have ATAPI mode disabled.

              DRAM CONFIGURATION

      Size          Bank 0          Bank 1

     512KB        (2) 256K x 9       NONE

      1MB         (2) 256K x 9   (2) 256K x 9

      2MB         (2) 1M x 9         NONE

     2.5MB        (2) 1M x 9     (2) 256K x 9

     2.5MB        (2) 256K x 9    (2) 1M x 9

      4MB         (2) 1M x 9      (2) 1M x 9

      8MB         (2) 4M x 9         NONE

     8.5MB        (2) 4M x 9     (2) 256K x 9

     8.5MB        (2) 256K x 9    (2) 4M x 9

      10MB        (2) 4M x 9      (2) 1M x 9

      10MB        (2) 1M x 9      (2) 4M x 9

      16MB        (2) 4M x 9      (2) 4M x 9

