
RELIALOGIC CORPORATION PRIVATE, LTD.

CA9342F

  Data bus:                  16-bit ISA

  Size:                      Half-length, half-height card

  Hard drive supported:      Four IDE(AT) drives

  Floppy drives supported:   Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                        CONNECTIONS

                Function                      Location

  40-pin primary IDE(AT) connector              CN1

  40-pin secondary IDE(AT) connector            CN2

  34-pin cable connector - floppy drive         CN3

  10-pin serial port 2 - internal               CN4

  16-pin game port                              CN5

  10-pin serial port 1- internal                CN6

  25-pin parallel port - external               CN7

  2-pin connector - drive active LED             J1

  4-pin connector - drive active LED             J2

                        USER CONFIGURABLE SETTINGS

              Function                    Location           Setting

     Game port enabled                      JP3            pins 1 & 2
                                                              closed

      Game port disabled                     JP3            pins 2 & 3
                                                              closed

     Parallel Port LPT1(378-37F)            JP6            pins 1 & 2
      select                                                  closed

      Parallel Port LPT2(278-27F)            JP6            pins 2 & 3
      select                                                  closed

     Floppy drive interface                 JP7            pins 1 & 2
      enabled                                                 closed

      Floppy drive interface                 JP7            pins 2 & 3
      disabled                                                closed

                   USER CONFIGURABLE SETTINGS CONTINUED

              Function                    Location           Setting

     Primary IDE(AT) interface             JP8             pins 1 & 2
      enabled                                                 closed

      Primary IDE(AT) interface             JP8             pins 2 & 3
      disabled                                                closed

     Factory configured - do not           JP14               N/A
      alter

     Secondary IDE(AT) interface           JP15            pins 1 & 2
      enabled                                                 closed

      Secondary IDE(AT) interface           JP15            pins 2 & 3
      disabled                                                closed

     Factory configured - do not           JP16               N/A
      alter

     IOCHRDY signal disabled                J3                Open

      IOCHRDY signal enabled                 J3               Closed

                      SERIAL PORT 1 ADDRESS SELECTION

             COM                       JP4                    JP5

              COM1             pins 1 & 2 closed      pins 1 & 2 closed

               COM3             pins 2 & 3 closed      pins 1 & 2 closed

             Disabled                  N/A             pins 2 & 3 closed

                      SERIAL PORT 2 ADDRESS SELECTION

             COM                       JP1                    JP2

              COM2             pins 1 & 2 closed      pins 1 & 2 closed

               COM4             pins 2 & 3 closed      pins 1 & 2 closed

             Disabled                  N/A             pins 2 & 3 closed

                     PARALLEL PORT MODE CONFIGURATION

            Mode                      JP9                    JP10

           Standard           pins 1 & 2 closed      pins 2 & 3 closed

               EPP             pins 2 & 3 closed      pins 1 & 2 closed

               ECP             pins 1 & 2 closed      pins 1 & 2 closed

            Disabled           pins 2 & 3 closed      pins 2 & 3 closed

