
INITIO CORPORATION

INI-6102

Data Bus                16-bit ISA
Card Size               Half-length, full-height card
Hard Drives supported   Up to 7 SCSI devices
Floppy drives supported None

[Image]

                                CONNECTIONS

        Function           Location          Function           Location

  50-pin SCSI connector       J1      34-pin cable connector       J3
  - internal                          - floppy drive

  50-pin SCSI connector       J2      4-pin connector -           JP1
  - external                          drive active LED

                        USER CONFIGURABLE SETTINGS

                   Function                      Label        Position

     Floppy drive interface enabled             SW1/8           On

      Floppy drive interface disabled            SW1/8          Off

     PnP configuration (Plug and Play)          SW1/7          Off
      enabled

      PnP configuration disabled                 SW1/7           On

                   BIOS ADDRESS SELECTION (PNP DISABLED)

          Address             SW1/4       SW1/5       SW1/6       SW1/7

            C8000h            Off         Off         Off         Off

             CC000h             On         Off         Off         Off

             D0000h            Off         On          Off         Off

             D4000h             On         On          Off         Off

             D8000h            Off         Off         On          Off

             DC000h             On         Off         On          Off

          Non-bootable         Off         On          On          Off

           Test mode            On         On          On          Off

                   BIOS ADDRESS SELECTION (PNP ENABLED)

        Address             SW1/4       SW1/5        SW1/6       SW1/7

          C8000h            Off         Off          Off          On

           CC000h            On          Off          Off          On

           D0000h            Off          On          Off          On

           D4000h            On           On          Off          On

           D8000h            Off         Off          On           On

           DC000h            On          Off          On           On

        BIOS disable         Off          On          On           On

          Test mode          On           On          On           On

                         ISA I/O ADDRESS SELECTION

          Setting               SW1/1           SW1/2           SW1/3

            130-13Fh             Off              On             Off

            140-14Fh              On              On             Off

            230-23Fh             Off             Off             On

            240-24Fh              On             Off             On

           330-33Fh             Off             Off             Off

            340-34Fh              On             Off             Off

           Test mode              On              On             On

  Note: Address 330-33Fh is the default when PNP is disabled.

