
BUSLOGIC, INC.

FLASHPOINT LW HOST ADAPTER

Data Bus                32-bit PCI
Card Size               Half-length, half-height card
Hard Drives supported   Up to 7 SCSI or 15 Wide SCSI devices
Floppy drives supported None

[Image]

                                CONNECTIONS

        Function           Location          Function           Location

  68-pin SCSI connector      CN1      50-pin SCSI connector       CN3
  - external                          - internal

  68-pin SCSI connector      CN2      LED connector               LED
  - internal

                             DIAGNOSTIC LED(S)

      LED              Color          Status           Condition

      LED1          Unidentified        On         Activity detected

      LED1          Unidentified       Off       Activity not detected

      LED2             Green            On      Low termination enabled

      LED2             Green           Off      Low termination disabled

      LED3             Green            On      High termination enabled

      LED3             Green           Off      High termination disabled

                              TECHNICAL NOTES

            Note: The FlashPoint LW host adapter automatically configures
            its own termination according to its placement within the
            SCSI bus. The low termination LED indicates that bits 0-7 of
            SCSI bus are terminated on the board. The high termination
            LED indicates that bits 8-15 of SCSI bus are terminated.

            Note: Only two connectors may be used at one time.

