
UNIDENTIFIED

IODE-3298WEI

Chipset               Winbond
Data Bus              16-bit ISA
Card Size             Half height, half length
Hard Drives Supported Two IDE(AT) devices

[Image]

                                CONNECTIONS

         Function            Label            Function            Label

  34-pin cable connector       J1      10-pin serial port 2 -      J5
  - floppy drive                       internal

  40-pin IDE(AT)               J2      25-pin parallel port -      J6
  connector                            external

  16-pin game port             J3      2-pin drive active LED      J8

  9-pin serial port 1 -        J4
  external

                        USER CONFIGURABLE SETTINGS

                  Setting                      Label         Position

  IDE(AT) interface enabled                    JP2/A        Pins 1 & 2
                                                              closed

  IDE(AT) interface disabled                   JP2/A        Pins 2 & 3
                                                              closed

  IDE address is 1F0h                          JP2/B        Pins 1 & 2
                                                              closed

  IDE address is 170h                          JP2/B        Pins 2 & 3
                                                              closed

  Floppy drive interface enabled               JP2/C        Pins 1 & 2
                                                              closed

  Floppy drive interface disabled              JP2/C        Pins 2 & 3
                                                              closed

  Floppy drive order is normal (A:, B:)        JP2/D        Pins 1 & 2
                                                              closed

  Floppy drive order is reversed (B:, A:)      JP2/D        Pins 2 & 3
                                                              closed

  Parallel port interrupt is IRQ7              JP3/A        Pins 1 & 2
                                                              closed

  Parallel port interrupt is IRQ5              JP3/A        Pins 2 & 3
                                                              closed

  Game port enabled                             JP4           Closed

  Game port disabled                            JP4            Open

  IDE interrupt is IRQ14                        J7          Pins 3 & 4
                                                              closed

  IDE interrupt is IRQ15                        J7          Pins 1 & 2
                                                              closed

            Note:J7 may not be present on all versions of this card.

               SERIAL PORT 1 ADDRESS SELECTION

       Setting              JP1/A                JP1/B

    3F8h (COM1:)       Pins 1 & 2 closed   Pins 1 & 2 closed

    3E8h (COM3:)       Pins 2 & 3 closed   Pins 2 & 3 closed

    2E8h (COM4:)       Pins 1 & 2 closed   Pins 2 & 3 closed

      Disabled         Pins 2 & 3 closed   Pins 1 & 2 closed

               SERIAL PORT 2 ADDRESS SELECTION

       Setting              JP1/C                JP1/D

    2F8h (COM2:)       Pins 1 & 2 closed   Pins 1 & 2 closed

    3E8h (COM3:)       Pins 1 & 2 closed   Pins 2 & 3 closed

    2E8h (COM4:)       Pins 2 & 3 closed   Pins 2 & 3 closed

      Disabled         Pins 2 & 3 closed   Pins 1 & 2 closed

               PARALLEL PORT ADDRESS SELECTION

       Setting              JP1/E                JP1/F

        378h           Pins 1 & 2 closed   Pins 1 & 2 closed

        3BCh           Pins 1 & 2 closed   Pins 2 & 3 closed

        278h           Pins 2 & 3 closed   Pins 2 & 3 closed

      Disabled         Pins 2 & 3 closed   Pins 1 & 2 closed

                       PARALLEL PORT MODE SELECTION

      Setting           JP3/B         JP3/C         JP5           JP6

   Unidirectional     Pins 1 & 2    Pins 1 & 2   Pins 1 & 2    Pins 1 & 2
                        closed       closed        closed       closed

        EPP           Pins 2 & 3    Pins 1 & 2   Pins 1 & 2    Pins 1 & 2
                        closed       closed        closed       closed

        ECP           Pins 1 & 2    Pins 2 & 3   Pins 1 & 3    Pins 1 & 3
                        closed       closed        closed       closed

