
UNIDENTIFIED

SAI2S12 MULTI I/O PLUS IDE CARD

Data Bus                16-bit ISA
Card Size               Half height, half length
Hard Drives Supported   Two IDE(AT) devices
Floppy Drives Supported Two 360KB, 720KB, 1.2MB, or 1.44MB drives

[Image]

                                CONNECTIONS

         Function            Label            Function            Label

  40-pin IDE(AT)              CN1      10-pin serial port 2 -      CN5
  connector                            internal

  34-pin cable connector      CN2      25-pin parallel port -      CN6
  - floppy drive                       external

  16-pin game port            CN3      IDE IOCHRDY signal          J1

  9-pin serial port 1 -       CN4      2-pin drive active LED      J2
  external

                        USER CONFIGURABLE SETTINGS

                  Setting                       Label        Position

     Serial port 2 address is 2F8h              JP1         Pins 1 & 2
      (COM2:)                                                 closed

      Serial port 2 address is 2E8h              JP1         Pins 2 & 3
      (COM4:)                                                 closed

     Serial port 2 enabled                      JP2         Pins 1 & 2
                                                              closed

      Serial port 2 disabled                     JP2         Pins 2 & 3
                                                              closed

     Game port enabled                          JP3         Pins 1 & 2
                                                              closed

      Game port disabled                         JP3         Pins 2 & 3
                                                              closed

     Serial port 1 address is 3F8h              JP4         Pins 1 & 2
      (COM1:)                                                 closed

      Serial port 1 address is 3E8h              JP4         Pins 2 & 3
      (COM3:)                                                 closed

     Parallel port address is LPT2:             JP5         Pins 1 & 2
                                                              closed

      Parallel port address is LPT3:             JP5         Pins 2 & 3
                                                              closed

     Serial port 1 enabled                      JP6         Pins 1 & 2
                                                              closed

      Serial port 1 disabled                     JP6         Pins 2 & 3
                                                              closed

     Floppy interface enabled                   JP7         Pins 1 & 2
                                                              closed

      Floppy interface disabled                  JP7         Pins 2 & 3
                                                              closed

                    USER CONFIGURABLE SETTINGS (CONT)

                  Setting                       Label        Position

     Hard drive is connected to IDE             JP8         Pins 1 & 2
      interface                                               closed

      Hard drive is not connected to IDE         JP8         Pins 2 & 3
      interface                                               closed

     IDE(AT) interface enabled                  JP9         Pins 1 & 2
                                                              closed

      IDE(AT) interface disabled                 JP9         Pins 2 & 3
                                                              closed

     Parallel port enabled                     JP10         Pins 1 & 2
                                                              closed

      Parallel port disabled                    JP10         Pins 2 & 3
                                                              closed

